Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM10000000264EW |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: ADVANCED DRIVER ASSISTANCE SYSTEM: PRE-COLLISION SYSTEM (for TMMMS Made): U030057; Internal Control Module Software Incompatibility Invalid / Incompatible Software Component; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] |
DTC
|
U030057
|
Internal Control Module Software Incompatibility Invalid / Incompatible Software Component
|
DESCRIPTION
The forward recognition camera receives vehicle information from the ECM via CAN communication.
If the vehicle information stored in the forward recognition camera differs from that sent from the ECM, the forward recognition camera stores this DTC.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
U030057
|
Internal Control Module Software Incompatibility Invalid / Incompatible Software Component
|
When the ignition switch is ON for 3 seconds or more, the vehicle information sent from the ECM does not match that stored in the forward recognition camera for 1 second or more.
|
-
SFI system
-
Forward recognition camera
-
ECM
|
CAUTION / NOTICE / HINT
NOTICE:
-
When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
-
If the forward recognition camera has been replaced with a new one, forward recognition camera adjustment must be performed.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
PROCEDURE
(a) Using the GTS, check for SFI system DTCs.
(1) for M20A-FKS:
Powertrain > Engine > Trouble Codes
(2) for 2ZR-FAE:
Powertrain > Engine and ECT > Trouble Codes
Result
|
Proceed to
|
SFI system DTCs are not output
|
A
|
SFI system DTCs are output
|
B
|
B |
|
GO TO SFI SYSTEM
for M20A-FKS: Click here
for 2ZR-FAE: Click here
|
A
|
|
|
2.
|
CHECK FOR DTCs (HEALTH CHECK)
|
(a) Connect the GTS to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the GTS on.
(d) Enter the following menus: System Select / Health Check.
(e) Check DTCs.
(f) Turn the ignition switch off.
OK:
DTCs indicating a vehicle information mismatch with the ECM are not output by any ECU other than the forward recognition camera.
Result
|
Proceed to
|
DTCs are not output
|
A
|
DTCs are output
|
B
|
B |
|
REPLACE ECM
for M20A-FKS: Click here
for 2ZR-FAE: Click here
|
A
|
|
|
(a) Connect the GTS to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the GTS on.
(d) Enter the following menus: Body Electrical / Pre-Collision System / Data List.
(e) Read the Data List according to the display on the GTS.
Body Electrical > Pre-Collision System > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
Vehicle Information (Conv/HV)
|
Vehicle information (Conv/HV)
|
Unknown / Conv / HV
|
Conv: Conventional
HV: Hybrid vehicle
|
-
|
Body Electrical > Pre-Collision System > Data List
Tester Display
|
Vehicle Information (Conv/HV)
|
HINT:
-
If the vehicle information stored in the forward recognition camera is different than the actual vehicle specifications, the vehicle information stored in the forward recognition camera may be incorrect. Check for DTCs and replace the forward recognition camera if necessary.
-
If the vehicle information stored in the forward recognition camera matches the actual vehicle specifications, the installed ECM is incompatible. Replace the ECM with a correct one.
Result
|
Proceed to
|
Vehicle information stored in forward recognition camera and actual vehicle specifications do not match
|
A
|
Vehicle information stored in forward recognition camera and actual vehicle specifications match
|
B
|
B |
|
REPLACE ECM
for M20A-FKS: Click here
for 2ZR-FAE: Click here
|
|