| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM10000000264EF |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 11/2022] |
| Title: ADVANCED DRIVER ASSISTANCE SYSTEM: PRE-COLLISION SYSTEM (for TMMMS Made): CUSTOMIZE PARAMETERS; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] | ||
CUSTOMIZE PARAMETERS
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
CUSTOMIZE PRE-COLLISION SYSTEM
(a) Customizing with the Multi-information Display
(1) Turn the ignition switch to ON.
(2) Enter the following menus: Settings Tab / Settings / Pre-collision System Settings.
(3) Select the setting by referring to the table below.
(4) Using the steering pad switches, change the customize settings.
Pre-collision System Settings
|
Display |
Description |
Setting |
Default |
|---|---|---|---|
|
PCS |
Turns the pre-collision system function on/off. |
ON/OFF |
ON |
|
Sensitivity |
Sets the pre-collision system function warning sensitivity |
Far/Mid/Near |
Mid |
(b) Customizing with the GTS
HINT:
The following items can be customized.
(1) Connect the GTS to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the GTS on.
(4) Enter the following menus: Customize Setting / Others.
(5) Select the setting by referring to the table below.
Others
|
Tester Display |
Description |
Default |
Setting |
ECU |
|---|---|---|---|---|
|
PCS Function ON/OFF State Stored |
Refer to the table below |
Not Stored |
$00:Not Stored,$01:Stored |
Forward recognition camera |
|
PCS Warning Timing State Stored 1 |
Refer to the table below |
Not Stored |
$00:Not Stored,$01:Stored |
Forward recognition camera |
|
PCS Warning Timing State Stored 2 |
Refer to the table below |
Stored |
$00:Not Stored,$01:Stored |
Forward recognition camera |
|
PCS Warning Timing State Stored 3 |
Refer to the table below |
Not Stored |
$00:Not Stored,$01:Stored |
Forward recognition camera |
|
Customize Setting |
Description |
Setting |
|---|---|---|
|
PCS Function ON/OFF State Stored |
Function to maintain the pre-collision system on/off setting when the ignition switch is turned off and then to ON. |
Not Stored: Not maintained (Pre-collision system always turns on) Stored: Maintained |
|
PCS Warning Timing State Stored 1 |
Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on. |
Not Stored: Not maintained (Setting changes to "Mid") Stored: Maintained |
|
PCS Warning Timing State Stored 2 |
Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is on. |
Not Stored: Not maintained (Setting changes to "Mid") Stored: Maintained |
|
PCS Warning Timing State Stored 3 |
Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is off. |
Not Stored: Not maintained (Setting changes to "Mid") Stored: Maintained |
|
|