Last Modified: 07-31-2024 |
6.11:8.1.0 |
Doc ID: RM100000002644A |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: ADVANCED DRIVER ASSISTANCE SYSTEM: DYNAMIC RADAR CRUISE CONTROL SYSTEM (for TMMMS Made): U031851; Software Incompatibility with Brake System Control Module Not Programmed; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] |
DTC
|
U031851
|
Software Incompatibility with Brake System Control Module Not Programmed
|
DESCRIPTION
If the forward recognition camera cannot verify the vehicle information sent from the skid control ECU (brake actuator assembly), the forward recognition camera stores DTC U031851.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
DTC Output from
|
U031851
|
Software Incompatibility with Brake System Control Module Not Programmed
|
The vehicle information sent from the skid control ECU (brake actuator assembly) cannot be verified by the forward recognition camera.
|
Forward recognition camera
|
Radar Cruise2
|
CAUTION / NOTICE / HINT
NOTICE:
-
When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
-
If the forward recognition camera has been replaced with a new one, it is necessary to perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
PROCEDURE
1.
|
REPLACE FORWARD RECOGNITION CAMERA
|
(a) Replace the forward recognition camera with a new one.
Click here
NEXT
|
|
|
(a) Clear the DTCs.
Powertrain > Radar Cruise2 > Clear DTCs
NEXT |
|
END
|
|