| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000002642A |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 11/2022] |
| Title: ADVANCED DRIVER ASSISTANCE SYSTEM: FRONT CAMERA SYSTEM (for TMMMS Made): UTILITY; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] | ||
UTILITY
NOTICE:
-
If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform forward recognition camera adjustment.
HINT:
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
![2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; ADVANCED DRIVER ASSISTANCE SYSTEM: FRONT CAMERA (for TMMMS Made): ADJUSTMENT (ONE TIME RECOGNITION)](/t3Portal/stylegraphics/info.gif)
Sequential Recognition: Click here
- When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket or the front camera system may not operate properly due to a difference in the transmissivity or black ceramic border.
Recognition Camera/Target Position Memory
HINT:
Recognition Camera/Target Position Memory is used to enter required information into the forward recognition camera.
(a) Perform Recognition Camera/Target Position Memory according to the display on the GTS.
Chassis > Front Recognition Camera > Utility
|
Tester Display |
|---|
|
Recognition Camera/Target Position Memory |
HINT:
For forward recognition camera adjustment procedures.
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
HINT:
Recognition Camera Axis Adjust is used to calibrate the internal data of the forward recognition camera to enhance its recognition accuracy.
Recognition Camera Axis Adjust
(a) Perform Recognition Camera Axis Adjust according to the display on the GTS.
Type A
Chassis > Front Recognition Camera > Utility
|
Tester Display |
|---|
|
Recognition Camera Axis Adjust |
Type B
Chassis > Front Recognition Camera > Utility
|
Tester Display |
|---|
|
Recognition Camera Axis Adjust |
HINT:
For forward recognition camera adjustment procedures.
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click here
Sequential Recognition: Click here
PCS Image Information Clear
HINT:
PCS Image Information Clear is used to clear the PCS Image Information data.
(a) Connect the GTS to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the GTS on.
(d) Enter the following menus: Chassis / front recognition camera / Utility / PCS Image Information Clear.
(e) Perform PCS Image Information Clear according to the display on the GTS.
Chassis > Front Recognition Camera > Utility
|
Tester Display |
|---|
|
PCS Image Information Clear |
PCS Image Record Setting
HINT:
PCS Image Record Setting is used to activate/deactivate the PCS image recording function.
(a) Connect the GTS to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the GTS on.
(d) Enter the following menus: Chassis / front recognition camera / Utility / PCS Image Record Setting.
(e) Perform PCS Image Record Setting according to the display on the GTS.
Chassis > Front Recognition Camera > Utility
|
Tester Display |
|---|
|
PCS Image Record Setting |
|
|