Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000002640J
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 - 11/2022]
Title: FRONT SUSPENSION: FRONT STABILIZER BAR: REMOVAL; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front stabilizer bar removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced (for HV Model)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link
*1: If matchmarks were not placed when removing parts related to steering operation, perform end position initial setting.

Front wheel alignment adjustment
  1. Perform "Reset Memory"
  2. Perform "Calibration"
  • DTCs are stored
  • ABS warning light illuminates
  • Brake system warning light (yellow indicator) illuminates
  • Slip indicator light illuminates
  • Electronically controlled brake system disabled or malfunctions

2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model): UTILITY

  • Steering gear assembly*1
  • No. 2 steering intermediate shaft assembly*1

End position initial setting

-

2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; POWER ASSIST SYSTEMS: POWER STEERING SYSTEM (for HV Model): CALIBRATION

Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link
*1: If matchmarks were not placed when removing parts related to steering operation, perform end position initial setting.

Front wheel alignment adjustment

for TMC Made

  • Perform "Reset Memory"
  • Perform "Calibration"
  • VSC is disabled or malfunctions
  • DTCs are output
  • Slip indicator light illuminates
  • ABS warning light illuminates

w/ Electric Parking Brake System: 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System TMC Made): UTILITY

w/o Electric Parking Brake System: 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model without Electric Parking Brake System TMC Made): UTILITY

for TMMMS Made

  • Perform "Reset Memory"
  • Perform acceleration sensor zero point calibration and store system information memorization
  • VSC is disabled or malfunctions
  • DTCs are output
  • Slip indicator light illuminates
  • ABS warning light illuminates

w/ Electric Parking Brake System: 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model with Electric Parking Brake System TMMMS Made): UTILITY

w/o Electric Parking Brake System: 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model without Electric Parking Brake System TMMMS Made): UTILITY

  • Steering gear assembly*1
  • No. 2 steering intermediate shaft assembly*1

for TMC Made (except G16E-GTS)

  • End position initial setting

-

2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; POWER ASSIST SYSTEMS: POWER STEERING SYSTEM (for Gasoline Model): CALIBRATION

Tire

ECU Data Initialization (When performing tire replacement after RoB code X2104 is output)

Active Torque Split AWD System

2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; GF1A (TRANSFER / 4WD / AWD): ACTIVE TORQUE SPLIT AWD SYSTEM: CALIBRATION

PROCEDURE

1. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL

2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

(a) for G16E-GTS:

(1) Remove the cap.

(b) Remove the nut and front stabilizer link assembly LH from the front shock absorber assembly.

NOTICE:

Do not damage the boot of the ball joint.

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.

3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.

4. REMOVE STEERING LINK ASSEMBLY

for G16E-GTS: Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; STEERING GEAR / LINKAGE: STEERING GEAR: REMOVAL+

except G16E-GTS: Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; STEERING GEAR / LINKAGE: STEERING GEAR: REMOVAL+

5. REMOVE FRONT NO. 1 STABILIZER BRACKET LH (except G16E-GTS)

(a) Remove the 2 bolts and front stabilizer bracket LH from the front suspension crossmember sub-assembly.

6. REMOVE FRONT NO. 1 STABILIZER BRACKET RH (except G16E-GTS)

HINT:

Perform the same procedure as for the LH side.

7. REMOVE FRONT STABILIZER BRACKET (for G16E-GTS)

(a) Remove the 4 bolts and front stabilizer brackets from the front suspension crossmember sub-assembly.

8. REMOVE FRONT STABILIZER BAR

(a) Remove the front stabilizer bar with 2 front stabilizer bar bushings from the front suspension crossmember sub-assembly.

9. REMOVE FRONT STABILIZER BAR BUSHING LH

(a) Remove the front stabilizer bar bushing LH from the front stabilizer bar.

10. REMOVE FRONT STABILIZER BAR BUSHING RH

HINT:

Perform the same procedure as for the LH side.