| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM10000000263S9 |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: POWER DISTRIBUTION: POWER INTEGRATION SYSTEM: TERMINALS OF ECU; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] | ||
TERMINALS OF ECU
NOTICE:
-
After turning the ignition switch to off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Click here
![2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION](/t3Portal/stylegraphics/info.gif)
-
When disconnecting the cable from the negative (-) auxiliary battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected.
Click here
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click here
CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND POWER DISTRIBUTION BOX ASSEMBLY
(a) Remove the power distribution box assembly and the main body ECU (multiplex network body ECU).
Click here
(b) Connect the power distribution box assembly connectors.
(c) Measure the voltage and resistance according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|
|
MB-13 (GND1) - Body ground |
Ground |
Always |
Below 1 Ω |
|
MB-14 (GND2) - Body ground |
Ground |
Always |
Below 1 Ω |
|
MB-26 (BECU) - Body ground |
Auxiliary battery power supply |
Ignition switch off |
11 to 14 V |
|
MB-27 (IGR) - Body ground |
Ignition power supply (IG signal) |
Ignition switch ON |
11 to 14 V |
(d) Install the main body ECU (multiplex network body ECU) to power distribution box assembly.
(e) Measure the voltage and check for pulses according to the value(s) in the table below.
|
Terminal No. (Symbol) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
|---|---|---|---|---|
|
43-8H - Body ground |
B - Body ground |
Rear window defogger signal (output) |
Rear window defogger switch off |
Below 1.5 V |
|
Rear window defogger switch on |
8 to 14 V |
|||
|
8F-5 - Body ground |
SB - Body ground*1 L - Body ground*2 |
Back-up light output |
Ignition switch ON, shift position is not R |
Below 1.5 V |
|
Ignition switch ON, shift position is R |
8 to 14 V |
|||
|
8D-11 - Body ground |
W - Body ground*1 LA-R - Body ground*2 |
DOME CUT relay output |
Always |
8 to 14 V |
|
8H-24 - Body ground |
R - Body ground*1 P - Body ground*2 |
|||
|
8A-6 - Body ground*3 |
GR - Body ground |
Mirror heater drive voltage (output) |
Rear window defogger switch off |
Below 1.5 V |
|
Rear window defogger switch on |
8 to 14 V |
|||
|
8M1 - Body ground |
B - Body ground*4 B-R - Body ground*5 |
Tail light output |
Tail light not illuminated |
Below 1.5 V |
|
Tail light illuminated |
8 to 14 V |
|||
|
8H-7 - Body ground*6 |
BE - Body ground |
Front fog light output |
Tail light illuminated, front fog light switch off |
8 to 14 V |
|
Tail light illuminated, front fog light switch on |
Below 1.5 V |
- *1: for G16E-GTS
- *2: except G16E-GTS
- *3: w/ Mirror Heater
- *4: except M20A-FKS
- *5: for M20A-FKS
- *6: w/ Front Fog Light
|
|