| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM10000000263NG |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 11/2022] |
| Title: FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM (for G16E-GTS RH Side): INSTALLATION; 2023 MY GR Corolla [09/2022 - 11/2022] | ||
INSTALLATION
PROCEDURE
1. TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
|
(a) Temporarily install the front lower No. 1 suspension arm sub-assembly RH to the front suspension crossmember sub-assembly with the 2 bolts and nut. |
|
(b) Connect the front lower No. 1 suspension arm sub-assembly RH to the front lower ball joint assembly RH with the bolt and 2 nuts.
Torque:
89 N·m {908 kgf·cm, 66 ft·lbf}
2. INSTALL FRONT WHEEL
Click here
![2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ]; MAINTENANCE: TIRE AND WHEEL: INSTALLATION](/t3Portal/stylegraphics/info.gif)
3. STABILIZE SUSPENSION
Click here
4. FULLY TIGHTEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
|
(a) Fully tighten the bolt (A). Torque: 240 N·m {2447 kgf·cm, 177 ft·lbf} |
|
(b) Fully tighten the bolt (B).
Torque:
125 N·m {1275 kgf·cm, 92 ft·lbf}
NOTICE:
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.
5. INSTALL REAR ENGINE UNDER COVER RH
Click here
6. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
7. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
Click here
|
|