| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM10000000262IN |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: G16E-GTS (BATTERY / CHARGING): GENERATOR: INSTALLATION; 2023 - 2025 MY GR Corolla [09/2022 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL GENERATOR ASSEMBLY
(a) Temporarily install the generator assembly.
(b) Using an E8 "TORX" socket wrench, install the 2 stud bolts.
Torque:
9.8 N·m {100 kgf·cm, 87 in·lbf}
(c) Install the generator assembly with the bolt and 2 nuts.
Torque:
25 N·m {255 kgf·cm, 18 ft·lbf}
(d) Connect the engine wire to terminal B with the nut.
Torque:
9.8 N·m {100 kgf·cm, 87 in·lbf}
(e) Close the terminal cap.
(f) Connect the wire harness clamp bracket with the bolt.
Torque:
10 N·m {102 kgf·cm, 7 ft·lbf}
(g) Connect the 3 connectors.
2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
Click here
![2023 MY GR Corolla [09/2022 - 11/2022]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
3. INSTALL V-RIBBED BELT
Click here
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
(a) Connect the cable to the negative (-) battery terminal and tighten the nut.
Torque:
5.4 N·m {55 kgf·cm, 48 in·lbf}
(b) for Type A:
(1) Install spare wheel cushion.
Click here
5. INSTALL DECK BOARD ASSEMBLY
Click here
6. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click here
|
|