| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM10000000260TE |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: G16E-GTS (ENGINE MECHANICAL): CYLINDER HEAD GASKET: INSTALLATION; 2023 - 2025 MY GR Corolla [09/2022 - ] | ||
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click here
![2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - ]; INTRODUCTION: REPAIR INSTRUCTION: PRECAUTION](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. INSTALL CYLINDER HEAD GASKET
(a) Clean the cylinder block sub-assembly and cylinder head sub-assembly with solvent.
|
(b) Place a new cylinder head gasket on the cylinder block sub-assembly with the Lot No. stamp facing upward. NOTICE: Make sure that the cylinder head gasket is installed in the correct orientation. |
|
2. INSTALL CYLINDER HEAD SUB-ASSEMBLY
Click here
3. INSTALL VALVE STEM CAP
Click here
4. INSTALL VALVE LASH ADJUSTER ASSEMBLY
Click here
5. INSTALL NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
Click here
6. INSTALL NO. 1 CAMSHAFT BEARING CAP
Click here
7. INSTALL NO. 5 CAMSHAFT BEARING CAP
Click here
8. INSTALL INTAKE CAMSHAFT SUB-ASSEMBLY
Click here
|
|