BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model without Electric Parking Brake System TMC Made): C00632A,...,C052096; Yaw Rate Sensor Signal Stuck In Range; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022

Last Modified: 05-13-2024	6.11:8.1.0	Doc ID: RM10000000260RB
Model Year Start: 2023	Model: GR Corolla	Prod Date Range: [09/2022 - ]
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model without Electric Parking Brake System TMC Made): C00632A,...,C052096; Yaw Rate Sensor Signal Stuck In Range; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 - ]

DTC

C00632A

Yaw Rate Sensor Signal Stuck In Range

DTC

C05201C

Multi-axis Acceleration Sensor Module "A" Circuit Voltage Out of Range

DTC

C05202A

Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range

DTC

C052096

Multi-axis Acceleration Sensor Module "A" Component Internal Failure

DESCRIPTION

The airbag sensor assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition.

These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly).

The skid control ECU (brake actuator assembly) receives signals from the yaw rate and acceleration sensor (airbag sensor assembly) via CAN communication.

HINT:

If a communication error with the yaw rate and acceleration sensor (airbag sensor assembly) is detected, DTCs U012587 and/or U015187 are stored.

If a DTC related to the CAN communication line is output, first troubleshoot the CAN communication line.

DTCs may be stored if either of the following occurs:

Yaw rate and acceleration sensor (airbag sensor assembly) installation abnormality.
Yaw rate and acceleration sensor (airbag sensor assembly) signal malfunction.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area
C00632A	Yaw Rate Sensor Signal Stuck In Range	A yaw rate sensor (airbag sensor assembly) stuck malfunction status continues.	Yaw rate sensor (airbag sensor assembly) installation Yaw rate sensor (airbag sensor assembly)
C05201C	Multi-axis Acceleration Sensor Module "A" Circuit Voltage Out of Range	At a vehicle speed of 30 km/h (19 mph) or more, the difference between the forward and backward G calculated from the acceleration sensor (airbag sensor assembly) value and that calculated from the vehicle speed sensor exceeds 0.35 G for 60 seconds or more.	Acceleration sensor (airbag sensor assembly) installation Acceleration sensor (airbag sensor assembly)
C05202A	Multi-axis Acceleration Sensor Module "A" Signal Stuck In Range	Any of the following is detected: The acceleration sensor (airbag sensor assembly) output value does not change 16 times or more as the vehicle speed drops from 30 km/h (19 mph) to 0 km/h (0 mph). A GL1 stuck malfunction status continues. A GL2 stuck malfunction status continues.	Acceleration sensor (airbag sensor assembly) installation Acceleration sensor (airbag sensor assembly)
C052096	Multi-axis Acceleration Sensor Module "A" Component Internal Failure	Either of the following is detected: A data malfunction signal is received from the acceleration sensor (airbag sensor assembly). Output values of GL1 and GL2 (front and rear, left and right) are outside permitted output range for 60 seconds or more.	Acceleration sensor (airbag sensor assembly) installation Acceleration sensor (airbag sensor assembly)

PROCEDURE

1.	CHECK AIRBAG SENSOR ASSEMBLY INSTALLATION

(a) Check that the yaw rate and acceleration sensor (airbag sensor assembly) has been installed properly.

Click here

OK:

The yaw rate and acceleration sensor (airbag sensor assembly) is tightened to the specified torque.

The yaw rate and acceleration sensor (airbag sensor assembly) is not installed in a tilted position.

REPLACE AIRBAG SENSOR ASSEMBLY

INSTALL AIRBAG SENSOR ASSEMBLY CORRECTLY