Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000025YWD
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: DRIVE SHAFT / PROPELLER SHAFT: FRONT DRIVE SHAFT ASSEMBLY (for G16E-GTS): INSTALLATION; 2023 - 2025 MY GR Corolla [09/2022 -        ]

INSTALLATION

PROCEDURE

1. INSTALL FRONT DRIVE SHAFT HOLE SNAP RING LH

(a) Install a new front drive shaft hole snap ring LH to the front drive shaft assembly LH.

2. INSTALL DRIVE SHAFT BEARING BRACKET HOLE SNAP RING

(a) Install a new drive shaft bearing bracket hole snap ring to the front drive shaft assembly RH.

3. INSTALL FRONT DRIVE SHAFT ASSEMBLY LH

(a) Coat the snap ring of the front drive inboard joint assembly with MP grease.

(b) Coat the splines of the front drive inboard joint assembly with Toyota genuine manual transmission gear oil LV.

*a

Cross Section of Front Drive Shaft Oil Seal LH

MP Grease

Toyota Genuine Oil Seal Side Lip Grease

(c) Coat the lip of the front drive shaft oil seal LH with MP grease and Toyota genuine oil seal side lip grease as shown in the illustration.

HINT:

Apply a light coat of MP grease and Toyota genuine oil seal side lip grease to the entire circumference of the front drive shaft oil seal LH.

(d) Align the inboard joint splines, and using a brass bar and a hammer, install the front drive shaft assembly LH.

NOTICE:

  • Face the end gap of the front drive shaft hole snap ring downward.
  • Do not damage the front drive shaft oil seal LH.
  • Do not damage the front axle inboard joint boot LH.
  • Make sure to center the front drive shaft assembly LH during installation to prevent damage to the front drive shaft hole snap ring.

HINT:

Confirm whether the drive shaft is securely driven in by checking the reaction force and sound.

(e) Apply 0.1 to 0.3 g (0.00353 to 0.0105 oz) of Toyota Body Grease W to each of the 4 areas shown in the illustration.

Toyota Body Grease W

(f) Align the matchmarks and install the front drive shaft assembly to the front axle assembly.

NOTICE:

  • Do not push the front axle assembly towards the outside of the vehicle any further than necessary.
  • Check that there is no foreign matter on the deflector or contact surfaces.
  • Do not damage the front axle outboard joint boot.
  • Do not damage the front disc brake dust cover.
  • Do not damage the deflector.

*a

Matchmark

4. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH

(a) Coat the lip of the transfer case oil seal RH with MP grease.

(b) Install a new drive shaft bearing bracket hole snap ring to the front drive shaft assembly RH.

(c) Coat the splines of the front drive inboard joint assembly with Toyota genuine manual transmission gear oil LV.

(d) Align the inboard joint splines, and securely insert the front drive shaft assembly RH.

NOTICE:

  • Do not damage the transfer case oil seal RH.
  • Do not damage the front axle inboard joint boot.
  • When inserting the front drive shaft assembly RH, keep it level.

(e) Install the drive shaft bearing bracket hole snap ring and a new No. 1 drive shaft bearing bracket setting bolt.

Torque:

32.4 N·m {330 kgf·cm, 24 ft·lbf}

(f) Apply 0.1 to 0.3 g (0.00353 to 0.0105 oz) of Toyota Body Grease W to each of the 4 areas shown in the illustration.

Toyota Body Grease W

(g) Align the matchmarks and install the front drive shaft assembly RH to the front axle assembly.

NOTICE:

  • Do not damage the front disc brake dust cover.
  • Do not damage the front axle outboard joint boot.
  • Check that there is no foreign matter on the contact surfaces.
  • Do not push the front axle assembly towards the outside of the vehicle any further than necessary.

*a

Matchmark

5. CONNECT FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY

Click here 2023 - 2025 MY GR Corolla [09/2022 -        ]; AXLE AND DIFFERENTIAL: FRONT AXLE HUB (for G16E-GTS): INSTALLATION+

6. INSTALL FRONT STABILIZER LINK ASSEMBLY

Click here 2023 MY GR Corolla [09/2022 - 11/2022]; FRONT SUSPENSION: FRONT SHOCK ABSORBER (for G16E-GTS): INSTALLATION+ 2023 - 2025 MY GR Corolla [11/2022 -        ]; FRONT SUSPENSION: FRONT SHOCK ABSORBER (for G16E-GTS): INSTALLATION+

7. CONNECT TIE ROD END SUB-ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; STEERING GEAR / LINKAGE: STEERING GEAR: INSTALLATION+ 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]; STEERING GEAR / LINKAGE: STEERING GEAR: INSTALLATION+

8. INSTALL FRONT SPEED SENSOR

Click here 2023 - 2025 MY GR Corolla [09/2022 -        ]; AXLE AND DIFFERENTIAL: FRONT AXLE HUB (for G16E-GTS): INSTALLATION+

9. INSTALL FRONT AXLE SHAFT NUT

(a) Clean the threaded parts on the front drive shaft assembly and a new front axle shaft nut using non-residue solvent.

NOTICE:

  • Be sure to perform this work even when using a new front drive shaft assembly.
  • Keep the threaded parts free of oil and foreign matter.

(b) Using a 30 mm deep socket wrench, install the front axle shaft nut while applying the brakes.

Torque:

294 N·m {2998 kgf·cm, 217 ft·lbf}

HINT:

Keep depressing the brake pedal to prevent the drive shaft from rotating.

(c) Using a chisel and a hammer, stake the front axle shaft nut.

10. ADD MANUAL TRANSAXLE OIL

Click here 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]; MAINTENANCE: EA67F / EA68F MANUAL TRANSAXLE OIL: REPLACEMENT+ 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [11/2022 -        ]; MAINTENANCE: EA67F / EA68F MANUAL TRANSAXLE OIL: REPLACEMENT+

11. ADD TRANSFER OIL

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; MAINTENANCE: GF1A TRANSFER OIL: REPLACEMENT+

12. INSPECT FOR MANUAL TRANSAXLE OIL LEAK

13. INSPECT FOR TRANSFER OIL LEAK

14. INSTALL FRONT WHEEL

Click here 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]; MAINTENANCE: TIRE AND WHEEL: INSTALLATION

15. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; ALIGNMENT / HANDLING DIAGNOSIS: FRONT WHEEL ALIGNMENT: ADJUSTMENT 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]; ALIGNMENT / HANDLING DIAGNOSIS: FRONT WHEEL ALIGNMENT: ADJUSTMENT

16. INSTALL REAR ENGINE UNDER COVER LH

Click here 2023 MY GR Corolla [09/2022 - 11/2022]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [11/2022 -        ]; FRONT SUSPENSION: FRONT SUSPENSION MEMBER: INSTALLATION+

17. INSTALL REAR ENGINE UNDER COVER RH

Click here 2023 MY GR Corolla [09/2022 - 11/2022]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2023 - 2025 MY GR Corolla [11/2022 -        ]; FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM (for G16E-GTS RH Side): INSTALLATION+

18. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here 2023 MY GR Corolla [09/2022 - 11/2022]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+ 2023 - 2025 MY GR Corolla [11/2022 -        ]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: INSTALLATION+

19. CHECK FOR SPEED SENSOR SIGNAL

Click here 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 -        ]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model without Electric Parking Brake System TMC Made): TEST MODE PROCEDURE