Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000025Y0T
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: G16E-GTS (ENGINE CONTROL): IGNITION COIL AND SPARK PLUG: REMOVAL; 2023 - 2025 MY GR Corolla [09/2022 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during ignition coil assembly or spark plug removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link
  • Replacement of ignition coil assembly
  • Replacement of spark plug

Inspection after repair
  • Poor idle, etc.
  • Engine start function, etc.

2023 - 2025 MY GR Corolla [09/2022 -        ]; G16E-GTS (ENGINE CONTROL): SFI SYSTEM: INITIALIZATION

PROCEDURE

1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Click here 2023 MY GR Corolla [09/2022 - 11/2022]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+ 2023 - 2025 MY GR Corolla [11/2022 -        ]; G16E-GTS (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

2. REMOVE IGNITION COIL ASSEMBLY

(a) Disconnect the 3 ignition coil assembly connectors.

(b) Remove the bolt.

(c) Disengage the clamp and disconnect the engine wire.

(d) Remove the 3 bolts and 3 ignition coil assemblies from the cylinder head cover sub-assembly.

NOTICE:

If an ignition coil assembly has been struck or dropped, replace it.

HINT:

Arrange the removed parts in the correct order.

3. REMOVE SPARK PLUG

Click here 2023 - 2025 MY GR Corolla [09/2022 -        ]; MAINTENANCE: G16E-GTS SPARK PLUG: REMOVAL+