Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000025Y02 |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 -
] |
Title: G16E-GTS (ENGINE CONTROL): CAMSHAFT OIL CONTROL SOLENOID: REMOVAL; 2023 - 2025 MY GR Corolla [09/2022 - ] |
REMOVAL
PROCEDURE
1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Click here
2. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side)
(a) Disconnect the camshaft timing oil control solenoid assembly connector.
|
|
(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the No. 2 timing chain cover assembly.
NOTICE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
3. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side)
(a) Disconnect the camshaft timing oil control solenoid assembly connector.
|
|
(b) Remove the 2 bolts and camshaft timing oil control solenoid assembly from the No. 2 timing chain cover assembly.
NOTICE:
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
4. REMOVE O-RING
HINT:
Perform this procedure only when replacement of the O-ring is necessary.
(a) Remove the O-ring from the camshaft timing oil control solenoid assembly.
NOTICE:
-
When removing the O-ring, be careful not to damage the O-ring groove of the camshaft timing oil control solenoid assembly.
-
If the O-ring groove of the camshaft timing oil control solenoid assembly is damaged, replace the camshaft timing oil control solenoid assembly with a new one.
|
|
|