Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000025XYN |
Model Year Start: 2023 |
Model: Corolla |
Prod Date Range: [09/2022 -
] |
Title: 2ZR-FXE (ENGINE CONTROL): CRANKSHAFT POSITION SENSOR: REMOVAL; 2023 - 2025 MY Corolla Corolla HV [09/2022 - ] |
REMOVAL
PROCEDURE
1. REMOVE REAR ENGINE UNDER COVER RH
(a) Type A:
(1) Remove the screw, 7 clips and rear engine under cover RH from the vehicle.
|
|
(b) Type B:
(1) Remove the screw, 8 clips and rear engine under cover RH from the vehicle.
2. REMOVE CRANKSHAFT POSITION SENSOR
(a) Disconnect the crankshaft position sensor connector.
|
|
(b) Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.
NOTICE:
If the crankshaft position sensor has been struck or dropped, replace it.
|