Last Modified: 07-31-2024 6.11:8.1.0 Doc ID: RM1000000025XYN
Model Year Start: 2023 Model: Corolla Prod Date Range: [09/2022 -           ]
Title: 2ZR-FXE (ENGINE CONTROL): CRANKSHAFT POSITION SENSOR: REMOVAL; 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]

REMOVAL

PROCEDURE

1. REMOVE REAR ENGINE UNDER COVER RH

(a) Type A:

(1) Remove the screw, 7 clips and rear engine under cover RH from the vehicle.

*A

Type A

*B

Type B

(b) Type B:

(1) Remove the screw, 8 clips and rear engine under cover RH from the vehicle.

2. REMOVE CRANKSHAFT POSITION SENSOR

(a) Disconnect the crankshaft position sensor connector.

(b) Remove the bolt and crankshaft position sensor from the cylinder block sub-assembly.

NOTICE:

If the crankshaft position sensor has been struck or dropped, replace it.