Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000025XFK
Model Year Start: 2023 Model: Corolla Prod Date Range: [09/2022 -           ]
Title: 2ZR-FXE (FUEL): FUEL SYSTEM: ON-VEHICLE INSPECTION; 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]

ON-VEHICLE INSPECTION

PROCEDURE

1. CHECK FUEL PUMP OPERATION AND INSPECT FOR FUEL LEAK

(a) Check fuel pump operation.

(1) Connect the Techstream to the DLC3.

(2) Turn the ignition switch to ON.

NOTICE:

Do not start the engine.

(3) Turn the Techstream on.

(4) Enter the following menus: Powertrain / Engine / Active Test / Activate the Circuit Relay.

Powertrain > Engine > Active Test

Tester Display

Activate the Circuit Relay

(5) Check for pressure in the fuel tube sub-assembly from the fuel line. Check that sounds of fuel flowing from the fuel tank assembly can be heard. If no sounds can be heard, check the relay, fuel pump, ECM and wiring connectors.

(b) Inspect for fuel leaks.

(1) Check that there are no fuel leaks from the fuel system after doing any maintenance or repairs. If there is a fuel leak, repair or replace parts as necessary.

(c) Turn the ignition switch to OFF.

(d) Disconnect the Techstream from the DLC3.

2. CHECK FUEL PRESSURE

(a) Discharge fuel system pressure.

Click here 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; 2ZR-FXE (FUEL): FUEL SYSTEM: PRECAUTION

(b) Measure the auxiliary battery voltage.

Standard Voltage:

11 to 14 V

(c) Open the cover of the EFI fuel pipe clamp and remove the EFI fuel pipe clamp from the fuel tube connector.

Open

Pull

(d) Disconnect the fuel tube sub-assembly from the fuel pipe.

Click here 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; 2ZR-FXE (FUEL): FUEL SYSTEM: PRECAUTION

(e) Install SST (EFI fuel pressure gauge) as shown in the illustration.

SST: 09268-00010

09268-00020

09268-00030

SST: 09268-45101

09268-41260

09268-41280

09268-41700

95336-08070

*1

Fuel Tube Sub-assembly (Vehicle Side)

*a

SST (Gauge)

*b

SST (Hose Joint)

*c

SST (Hose)

*d

SST (T Joint)

*e

SST (Fuel Tube Connector)

*f

SST (Hose Band)

*g

Fuel Pipe (Vehicle Side)

(f) Wipe up any spilled fuel.

(g) Connect the cable to the negative (-) auxiliary battery terminal.

Click here 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; MAINTENANCE: 2ZR-FXE AUXILIARY BATTERY: INSTALLATION

(h) Connect the Techstream to the DLC3.

(i) Turn the ignition switch to ON.

NOTICE:

Do not start the engine.

(j) Turn the Techstream on.

(k) Enter the following menus: Powertrain / Engine / Active Test / Activate the Circuit Relay.

Powertrain > Engine > Active Test

Tester Display

Activate the Circuit Relay

(l) Measure the fuel pressure.

Standard Fuel Pressure:

304 to 343 kPa (3.1 to 3.5 kgf/cm2, 44 to 50 psi)

  • If the fuel pressure is more than the standard, replace the fuel pressure regulator assembly.
  • If the fuel pressure is less than the standard, check the fuel hoses and their connections, fuel pump and fuel pressure regulator assembly.

(m) Put the engine in Inspection Mode (Maintenance Mode).

Powertrain > Hybrid Control > Utility

Tester Display

Inspection Mode

(n) Start the engine.

(o) Measure the fuel pressure at idle.

Standard Fuel Pressure:

304 to 343 kPa (3.1 to 3.5 kgf/cm2, 44 to 50 psi)

HINT:

Refer to Standard Idle Speed.

Click here 2020 - 2025 MY Corolla Corolla HV [01/2019 -        ]; 2ZR-FXE (ENGINE MECHANICAL): ENGINE: ON-VEHICLE INSPECTION+

(p) Disconnect the Techstream from the DLC3.

(q) Stop the engine.

(r) Check that the fuel pressure remains as specified for 5 minutes.

Standard Fuel Pressure:

147 kPa (1.5 kgf/cm2, 21 psi) or more

If the result is not as specified, check the fuel pump, fuel pressure regulator assembly and/or fuel injector assemblies.

(s) After checking the fuel pressure, disconnect the cable from the negative (-) auxiliary battery terminal and carefully remove SST to prevent fuel from spraying.

Click here 2023 MY Corolla Corolla HV [09/2022 - 11/2022]; MAINTENANCE: 2ZR-FXE AUXILIARY BATTERY: REMOVAL 2023 - 2025 MY Corolla Corolla HV [11/2022 -        ]; MAINTENANCE: 2ZR-FXE AUXILIARY BATTERY: REMOVAL

(t) Connect the fuel tube sub-assembly to the fuel pipe.

Click here 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; 2ZR-FXE (FUEL): FUEL SYSTEM: PRECAUTION

(u) Install the EFI fuel pipe clamp to the fuel tube connector and close the cover of the EFI fuel pipe clamp.

(v) Connect the cable to the negative (-) auxiliary battery terminal.

Click here 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; MAINTENANCE: 2ZR-FXE AUXILIARY BATTERY: INSTALLATION

(w) Inspect for fuel leaks.

Click here 2023 - 2025 MY Corolla Corolla HV [09/2022 -        ]; 2ZR-FXE (FUEL): FUEL SYSTEM: ON-VEHICLE INSPECTION+