Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000025UO0 |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 -
] |
Title: EA67F / EA68F (MANUAL TRANSMISSION / TRANSAXLE): MANUAL TRANSAXLE SYSTEM: DTC CHECK / CLEAR; 2023 - 2025 MY Corolla Corolla Hatchback GR Corolla [09/2022 - ] |
DTC CHECK / CLEAR
CHECK DTC (Using Techstream)
(a) DTCs which are stored in the ECM can be output to the Techstream.
(1) Connect the Techstream to the DLC3.
(2) Turn the engine switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Powertrain / Engine / Trouble Codes.
Powertrain > Engine > Trouble Codes
(5) Confirm the DTCs and freeze frame data, and then write them down.
(6) Confirm the details of the DTCs.
Click here
CLEAR DTC (Using Techstream)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Engine / Trouble Codes.
(e) Clear the DTCs.
Powertrain > Engine > Clear DTCs
CLEAR DTC (When Not Using Techstream)
(a) Perform either of the following operations.
NOTICE:
After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.
Click here
(1) Disconnect the cable from the negative (-) battery terminal for more than 1 minute.
(2) Remove the EFI NO. 1 fuse from the No. 1 engine room relay block and No. 1 junction block assembly located inside the engine compartment for more than 1 minute.
|