Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000025TEH
Model Year Start: 2023 Model: Corolla Hatchback Prod Date Range: [09/2022 -           ]
Title: PA10 (HYBRID TRANSMISSION / TRANSAXLE): SHIFT LEVER POSITION SENSOR: REMOVAL; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV [09/2022 -        ]

REMOVAL

PROCEDURE

1. SECURE VEHICLE

(a) Fully apply the parking brake and chock a wheel.

CAUTION:

  • Make sure to apply the parking brake and chock a wheel before performing this procedure.
  • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here 2023 MY Corolla Corolla HV [09/2022 - 11/2022]; 2ZR-FXE (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+ 2023 - 2025 MY Corolla Corolla HV [11/2022 -        ]; 2ZR-FXE (ENGINE MECHANICAL): ENGINE ASSEMBLY: REMOVAL+

3. DISCONNECT FLOOR SHIFT TRANSMISSION CONTROL SELECT CABLE

(a) Move the shift lever to N.

(b) While disengaging the clip as shown in the illustration, disconnect the floor shift transmission control select cable from the transmission control shaft lever together with the clip.

*a

Clip

*b

45° to 60°

(c) Remove the clip and disconnect the floor shift transmission control select cable from the No. 1 transmission control cable bracket.

4. REMOVE SHIFT LEVER POSITION SENSOR

(a) Disconnect the shift lever position sensor connector.

(b) Remove the nut, washer and transmission control shaft lever from the shift lever position sensor.

(c) Using a screwdriver with its tip wrapped with protective tape, pry out the tabs of the lock plate.

*1

Lock Plate

*a

Protective Tape

(d) Remove the lock nut and lock plate from the shift lever position sensor.

*1

Lock Nut

*2

Lock Plate

(e) Remove the 2 bolts and shift lever position sensor from the hybrid vehicle transaxle assembly.