Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000025SZ4 |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: METER / GAUGE / DISPLAY: COMBINATION METER: REMOVAL; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during combination meter assembly removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedures
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
for TMC Made
-
Combination meter assembly
|
Update ECU security key
|
Vehicle Control History (RoB) are stored
|
|
PROCEDURE
1. REMOVE NO. 1 INSTRUMENT SIDE PANEL
Click here
2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
3. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Click here
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL
Click here
5. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
Click here
6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here
7. REMOVE AIR CONDITIONING CONTROL ASSEMBLY
Click here
8. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
Click here
9. REMOVE NO. 2 INSTRUMENT SIDE PANEL
Click here
10. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY
Click here
11. REMOVE UPPER STEERING COLUMN COVER
Click here
12. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Click here
13. REMOVE CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL
Click here
14. REMOVE INSTRUMENT CLUSTER FINISH PANEL RETAINER
Click here
15. REMOVE COMBINATION METER ASSEMBLY
(b) except 12.3 Inch Display:
(2) Disconnect the 2 connectors to remove the combination meter assembly.
(c) for 12.3 Inch Display:
(2) Disconnect the 2 connectors to remove the combination meter assembly.
|