INSTALLATION

PROCEDURE

1. INSTALL COOLING FAN MOTOR

(a) Install the cooling fan motor to the fan shroud with the 3 screws.

Torque:

3.9 N·m {40 kgf·cm, 35 in·lbf}

(b) Connect the cooling fan motor connector.

(c) Engage the 2 clamps to connect the wire harness to the fan shroud.

2. INSTALL FAN

NOTICE:

Do not reverse the position of the fan when installing them. Doing so may damage the parts.

(a) Install the fan to the cooling fan motor with the nut.

Torque:

6.3 N·m {64 kgf·cm, 56 in·lbf}

3. INSTALL FAN WITH MOTOR ASSEMBLY

(a) Engage the 2 guides.

(b) Engage the 2 claws to install the fan with motor assembly to the radiator assembly.

NOTICE:

Do not damage the radiator assembly when installing the fan with motor assembly.

(c) Engage the 2 wire harness clamps.

(d) Connect the cooling fan ECU connector.

4. INSTALL NO. 2 RADIATOR AIR GUIDE

(a) Engage the 5 claws to install the No. 2 radiator air guide.

5. CONNECT NO. 2 RADIATOR HOSE

(a) Engage the clamp to connect the No. 2 radiator hose to the hose clamp.

6. INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

(a) Install the upper radiator support sub-assembly with the 5 bolts.

Torque:

12.5 N·m {127 kgf·cm, 9 ft·lbf}

(b) Engage the 3 clamps to connect the wire harness to the upper radiator support sub-assembly.

(c) Connect the horn connector.

(d) Engage the clamp to connect the hood lock control cable assembly to the upper radiator support sub-assembly.

7. INSTALL HOOD LOCK ASSEMBLY

Click here

8. INSTALL INLET NO. 2 AIR CLEANER

(a) Install the inlet No. 2 air cleaner to the air cleaner case sub-assembly.

9. INSTALL INLET NO. 1 AIR CLEANER

(a) Install the inlet No. 1 air cleaner to the upper radiator support sub-assembly and inlet No. 2 air cleaner with the 3 bolts.

Torque:

4.0 N·m {41 kgf·cm, 35 in·lbf}

10. INSTALL HEADLIGHT ASSEMBLY

Click here

11. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Click here