Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000025R1Y
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 - 11/2022]
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (except TMC Made, and Gasoline Model, with Automatic Air Conditioning System): TERMINALS OF ECU; 2023 MY Corolla Corolla Hatchback GR Corolla [09/2022 - 11/2022]

TERMINALS OF ECU

CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY

HINT:

Check from the rear of the connector while it is connected to the air conditioning amplifier assembly.

Terminal No.

(Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

I48-1 (TAM) - I48-14 (SG-2)

R - BR

Thermistor assembly signal

  • Ignition switch ON
  • Ambient temperature: 25°C (77°F)

1.05 to 1.45 V

  • Ignition switch ON
  • Ambient temperature: 40°C (104°F)

0.64 to 0.87 V

I48-3 (SG-1) - Body ground

W - Body ground

Ground for cooler (room temp. sensor) thermistor

Always

Below 1 V

I48-5 (TR) - I48-3 (SG-1)

B - W

Cooler (room temp. sensor) thermistor signal

  • Ignition switch ON
  • Cabin temperature: 25°C (77°F)

1.05 to 1.45 V

  • Ignition switch ON
  • Cabin temperature: 40°C (104°F)

0.64 to 0.87 V

I48-6 (PRE) - I48-15 (SG-4)

L - G

Air conditioner pressure sensor signal

  • Ignition switch ON
  • Air conditioning system operating
  • Refrigerant pressure: Abnormal pressure (more than 2812 kPaG (28.7 kgf/cm2, 408 psi))

4.73 V or higher

  • Ignition switch ON
  • Air conditioning system operating
  • Refrigerant pressure: Abnormal pressure (less than 196 kPaG (2.0 kgf/cm2, 28 psi))

Below 0.62 V

  • Ignition switch ON
  • Air conditioning system operating
  • Refrigerant pressure: Normal pressure (less than 2812 kPaG (28.7 kgf/cm2, 408 psi) and more than 196 kPaG (2.0 kgf/cm2, 28 psi))

0.62 to 4.73 V*

I48-11 (S5-3) - I48-15 (SG-4)

B - G

Power supply for air conditioner pressure sensor

Ignition switch ON

4.75 to 5.25 V

Ignition switch off

Below 1 V

I48-14 (SG-2) - Body ground

BR - Body ground

Ground for thermistor assembly

Always

Below 1 V

I48-15 (SG-4) - Body ground

G - Body ground

Ground for air conditioner pressure sensor

Always

Below 1 V

I49-1 (CANL) - I49-2 (CANH)

W - G

CAN communication system

CAN communication is performed

Pulse generation

I49-5 (B) - I49-17 (GND)

LG - W-B

Power source (Back-up)

Always

11 to 14 V

I49-6 (IG+) - I49-17 (GND)

SB - W-B

Power source (IG)

Ignition switch ON

11 to 14 V

Ignition switch off

Below 1 V

I49-7 (LIN1) - I49-17 (GND)

V - W-B

LIN communication signal

Ignition switch ON

Pulse generation

(See waveform 2)

I49-17 (GND) - Body ground

W-B - Body ground

Ground for main power supply

Always

Below 1 V

I49-18 (SOL+) - I49-17 (GND)

B - W-B

Compressor solenoid operation signal

  • Engine running
  • Blower switch: LO
  • A/C switch: On

Pulse generation

(See waveform 4)

I49-21 (BLW) - I49-17 (GND)

W - W-B

Blower motor speed control signal

  • Ignition switch ON
  • Blower switch: LO

Pulse generation

(See waveform 1)

m3-2 (BUSG) - Body ground

-

Ground for BUS IC

Always

Below 1 V

m3-3 (BUS) - m3-2 (BUSG)

-

BUS IC control signal

Ignition switch ON

Pulse generation

(See waveform 3)

m3-4 (BUSB) - m3-2 (BUSG)

-

Power supply for BUS IC

Always

11 to 14 V

m3-5 (SG-3) - Body ground

GR - Body ground

Ground for No. 1 cooler thermistor

Always

Below 1 V

m3-6 (TE) - m3-5 (SG-3)

GR - GR

No. 1 cooler thermistor signal

  • Ignition switch ON
  • Evaporator temperature: 0°C (32°F)

1.7 to 2.1 V

  • Ignition switch ON
  • Evaporator temperature: 15°C (59°F)

0.9 to 1.3 V

  • *: While sensor voltage is 5 V.

(a) Waveform 1:

Item

Content

Terminal No.

I49-21 (BLW) - I49-17 (GND)

Tool Setting

2 V/DIV., 1 ms./DIV.

Condition

  • Ignition switch ON
  • Blower switch: LO

(b) Waveform 2:

Item

Content

Terminal No.

I49-7 (LIN1) - I49-17 (GND)

Tool Setting

2 V/DIV., 20 ms./DIV.

Condition

Ignition switch ON

(c) Waveform 3:

Item

Content

Terminal No.

m3-3 (BUS) - m3-2 (BUSG)

Tool Setting

2 V/DIV., 2 ms./DIV.

Condition

Ignition switch ON

(d) Waveform 4:

Item

Content

Terminal No.

I49-18 (SOL+) - I49-17 (GND)

Tool Setting

5 V/DIV., 500 μs./DIV.

Condition

  • Engine running
  • Blower switch: LO
  • A/C switch: On

CHECK AIR CONDITIONING CONTROL ASSEMBLY

HINT:

Check from the rear of the connector while it is connected to the air conditioning control assembly.

Terminal No.

(Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

I37-7 (LIN1) - Body ground

V - Body ground

LIN communication signal

Ignition switch ON

Pulse generation

(See waveform)

I37-8 (ILL+) - Body ground

LA-P - Body ground

Illumination signal

Taillight off

Below 1 V

Taillight on

11 to 14 V

I37-9 (IG+) - I37-13 (GND)

LA-LG - LA

Power source (IG)

Ignition switch off

Below 1 V

Ignition switch ON

11 to 14 V

I37-13 (GND) - Body ground

LA - Body ground

Ground for air conditioning control assembly

Always

Below 1 V

I37-14 (ILL-) - Body ground

LA-W - Body ground

Illumination signal

Always

Below 1 V

(a) Waveform:

Item

Content

Terminal No.

I37-7 (LIN1) - Body ground

Tool Setting

2 V/DIV., 20 ms./DIV.

Condition

Ignition switch ON