Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000025QD1 |
Model Year Start: 2023 |
Model: Corolla Hatchback |
Prod Date Range: [09/2022 -
] |
Title: K120 / K121 (CVT): SHIFT STROKE SENSOR: INSPECTION; 2023 - 2025 MY Corolla Corolla Hatchback [09/2022 - ] |
INSPECTION
PROCEDURE
1. INSPECT SHIFT STROKE SENSOR
(a) Connect 3 new dry-cell batteries (1.5 V each) in series.
(b) Prepare a magnet or equivalent tool.
(c) Connect a positive (+) lead from the batteries to terminal 2 (VDD) and a negative (-) lead to terminal 3 (GND).
*A
|
Type A
|
*B
|
Type B
|
*a
|
Component without harness connected
(Shift Stroke Sensor)
|
*b
|
Magnet Movement Direction
|
*c
|
Dry Cell Battery
|
*d
|
Magnet
|
*e
|
2.6 mm (0.102 in.) or less
|
-
|
-
|
(d) Wave the magnet left and right 2.6 mm (0.102 in.) or less from the tip of the shift stroke sensor to output a high/low signal while measuring the voltage.
(e) Measure the voltage according to the value(s) in the table below.
Standard Voltage (Combined Dry-cell Battery Voltage of 4.5 V):
Tester Connection
|
Condition
|
Specified Condition
|
4 (VOUT) - 3 (GND)
|
High voltage
|
4.09 to 4.19 V
|
Low voltage
|
0.36 to 0.45 V
|
Reference Voltage (Combined Dry-cell Battery Voltage of 5.0 V):
Tester Connection
|
Condition
|
Specified Condition
|
4 (VOUT) - 3 (GND)
|
High voltage
|
4.55 to 4.65 V
|
Low voltage
|
0.4 to 0.5 V
|
If the result is not as specified, replace the shift stroke sensor.
|