| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM1000000025Q6J |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 11/2022] |
| Title: INTERIOR PANELS / TRIM: ROOF HEADLINING (for Sedan): INSTALLATION; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] | ||
INSTALLATION
PROCEDURE
1. INSTALL ROOF HEADLINING ASSEMBLY
(a) Put the roof headlining assembly into the vehicle through the front door RH as shown in the illustration.
|
Install in this Direction |
- |
- |
NOTICE:
Do not damage the roof headlining assembly or vehicle interior.
(b) for Roof Side (for Normal Roof):
(1) Install the roof headlining assembly with the 3 clips.
(2) Engage the 2 claws to install the base of each visor holder.
(c) for Roof Side (for Moon Roof):
(1) Engage the 6 fasteners.
(2) Install the roof headlining assembly with the 3 clips.
(3) Engage the 2 claws to install the base of each visor holder.
(4) Connect the connector.
(d) Install the visor holder as shown in the illustration.
|
|
Install in this Direction |
HINT:
Use the same procedure for the LH side and RH side.
(e) for Rear Pillar RH Side:
(1) Engage the clamp.
(2) Connect the 2 connectors.
(f) for Front Pillar RH Side:
(1) Remove the protective cover.
(2) Connect each connector.
(3) Engage the 3 clamps.
(4) Install the protective cover.
(g) for Front Pillar LH Side:
(1) Remove the protective cover.
(2) Connect the 2 connectors.
(3) Engage the 4 clamps.
(4) Install the protective cover.
(h) for Windshield Glass Side with Connector:
(1) Connect each connector.
2. INSTALL VISOR ASSEMBLY LH
NOTICE:
- Make sure to install the visor assembly LH with its arrow facing the front of the vehicle.
- Hold the visor assembly with one hand so that it does not drop.
(a) w/ Vanity Light:
(1) Set the visor assembly LH into place by aligning it with the connector and screw fastening hole.
|
|
Install in this Direction |
NOTICE:
When setting the part into place, move it straight upward so as not to damage the connector.
(b) Connect the visor assembly LH to the visor holder.
(c) Install the visor assembly LH with the 2 screws.
3. INSTALL VISOR ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
4. INSTALL ASSIST GRIP SUB-ASSEMBLY
Click here
![2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Hatchback): INSTALLATION+](/t3Portal/stylegraphics/info.gif)
5. INSTALL REAR ASSIST GRIP ASSEMBLY LH
HINT:
Use the same procedure as for the assist grip sub-assembly.
6. INSTALL REAR ASSIST GRIP ASSEMBLY RH
HINT:
Use the same procedure as for the assist grip sub-assembly.
7. INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
for TMC Made:
for TMMMS Made:
8. INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)
for TMC Made:
for TMMMS Made:
9. INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ Cover)
Click here
10. INSTALL VANITY LIGHT ASSEMBLY (w/ Vanity Light)
for Bulb Type:
for LED Type:
11. INSTALL NO. 1 ROOM LIGHT ASSEMBLY
for Bulb Type:
for LED Type:
12. INSTALL MAP LIGHT ASSEMBLY
for TMC Made:
for TMMMS Made:
13. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY (for Manual Transaxle)
for EA67F / EA68F: Click here
for EG60: Click here
for EC65: Click here
14. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY (for CVT)
for K313: Click here
for K120: Click here
15. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Click here
16. INSTALL ROOF SIDE INNER GARNISH LH
(a) Engage the 2 guides as shown in the illustration.
|
|
Install in this Direction |
(b) Engage the 3 clips to install the roof side inner garnish LH as shown in the illustration.
|
|
Install in this Direction |
17. INSTALL REAR SEAT SIDE GARNISH LH (w/o Rear Seat Side Airbag)
(a) Pass the rear seatback hinge sub-assembly LH through the rear seat side garnish LH as shown in the illustration.
|
*1 |
Rear Seatback Hinge Sub-assembly LH |
|
|
Install in this Direction |
(b) Engage the 2 guides, 2 claws and clip to install the rear seat side garnish LH.
18. INSTALL REAR SEAT SIDE GARNISH LH (w/ Rear Seat Side Airbag)
(a) Pass the rear seatback hinge sub-assembly LH through the rear seat side garnish LH as shown in the illustration.
|
*1 |
Rear Seatback Hinge Sub-assembly LH |
|
|
Install in this Direction |
(b) Engage the 4 guides and 8 claws to install the rear seat side garnish LH.
19. INSTALL REAR UNDER SIDE COVER LH (for HV Model)
(a) Engage the guide, 4 clips and claw as shown in the illustration.
|
|
Install in this Direction |
(b) Install the rear under side cover LH with the 2 clips.
20. INSTALL ROOF SIDE INNER GARNISH RH
HINT:
Use the same procedure as for the LH side.
21. INSTALL REAR SEAT SIDE GARNISH RH
HINT:
Use the same procedure as for the LH side.
22. INSTALL REAR UNDER SIDE COVER RH (for HV Model)
HINT:
Use the same procedure as for the LH side.
23. INSTALL CENTER PILLAR UPPER GARNISH LH
Click here
24. INSTALL CENTER PILLAR LOWER GARNISH LH
Click here
25. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
Click here
26. INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side)
Click here
27. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
Click here
28. INSTALL REAR DOOR SCUFF PLATE LH (for Gasoline Model)
Click here
29. INSTALL REAR DOOR SCUFF PLATE LH (for HV Model)
|
(a) Engage the 3 guides and 7 claws to install the rear door scuff plate LH as shown in the illustration. HINT: Install the center pillar lower garnish LH side of the rear door scuff plate LH first. |
|
30. INSTALL FRONT PILLAR GARNISH LH
Click here
31. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
Click here
32. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
Click here
33. INSTALL FRONT DOOR SCUFF PLATE LH
Click here
34. INSTALL CENTER PILLAR UPPER GARNISH RH
HINT:
Use the same procedure as for the LH side.
35. INSTALL CENTER PILLAR LOWER GARNISH RH
HINT:
Use the same procedure as for the LH side.
36. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
37. INSTALL LAP BELT OUTER ANCHOR COVER (for RH Side)
HINT:
Use the same procedure as for the LH side.
38. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedure as for the LH side.
39. INSTALL REAR DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
40. INSTALL FRONT PILLAR GARNISH RH
HINT:
Use the same procedure as for the LH side.
41. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
HINT:
Use the same procedure as for the LH side.
42. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
43. INSTALL FRONT DOOR SCUFF PLATE RH
HINT:
Use the same procedure as for the LH side.
44. INSTALL REAR SEAT ASSEMBLY
Click here
45. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
Click here
46. INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
Click here
|
|