Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000025Q6H
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 - 11/2022]
Title: INTERIOR PANELS / TRIM: ROOF HEADLINING (for Sedan): DISASSEMBLY; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]

DISASSEMBLY

PROCEDURE

1. REMOVE TELEPHONE MICROPHONE ASSEMBLY (for TMC Made)

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; AUDIO / VIDEO: MICROPHONE: REMOVAL+

2. REMOVE MICROPHONE CASE (for TMC Made)

HINT:

Use the same procedure for all microphone cases.

(a) Disengage the 2 claws to remove the microphone case.

3. REMOVE NO. 1 ROOF SILENCER PAD (for Normal Roof)

(a) Remove the No. 1 roof silencer pad.

4. REMOVE NO. 2 ROOF SILENCER PAD (for TMC Made Normal Roof)

(a) Remove the 2 No. 2 roof silencer pads.

5. REMOVE NO. 2 ROOF SILENCER PAD (for TMMMS Made Normal Roof)

(a) Remove the 2 No. 2 roof silencer pads.

6. REMOVE ROOF SIDE RAIL SILENCER PAD LH (for Normal Roof)

(a) w/ Roof Side Rail Silencer Pad:

(1) Remove the roof side rail silencer pad LH.

7. REMOVE ROOF SIDE RAIL SILENCER PAD RH (for Normal Roof)

HINT:

Use the same procedure as for the LH side.

8. REMOVE ROOF HEADLINING PAD LH (for Normal Roof)

(a) w/ Roof Headlining Pad:

(1) Remove the roof headlining pad LH.

9. REMOVE ROOF HEADLINING PAD RH (for Normal Roof)

HINT:

Use the same procedure as for the LH side.

10. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; AUDIO / VIDEO: RADIO ANTENNA CORD (for Sedan): REMOVAL+

11. REMOVE NO. 1 ROOF WIRE (for TMC Made Normal Roof)

(a) Remove the adhesive tape from the roof headlining assembly.

*A

for Front Side with Connector

-

-

Adhesive Tape

-

-

(b) w/ Vanity Light:

(1) Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

*a

90°

-

-

Rotation Direction

-

-

(c) for Front Side with Connector:

(1) Disconnect the No. 1 roof wire from each notch.

*a

Notch

-

-

(d) Remove the No. 1 roof wire from the roof headlining assembly.

12. REMOVE NO. 1 ROOF WIRE (for TMMMS Made Normal Roof)

(a) Remove the adhesive tape from the roof headlining assembly.

*A

for Front Side with Connector

*B

w/o Pre-collision System

*C

w/ Pre-collision System

*D

w/ Vanity Light

Adhesive Tape

-

-

(b) w/ Vanity Light:

(1) Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

*a

90°

-

-

Rotation Direction

-

-

(c) for Front Side with Connector:

(1) Disconnect the No. 1 roof wire from each notch.

*A

for Front Side with Connector

*B

w/o Pre-collision System

*C

w/ Pre-collision System

-

-

*a

Notch

-

-

13. REMOVE NO. 1 ROOF WIRE (for TMC Made Moon Roof)

(a) Remove the adhesive tape from the roof headlining assembly.

*A

for Front Side with Connector

*B

w/o Pre-collision System

*C

w/ Pre-collision System

-

-

Adhesive Tape

-

-

(b) Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

*A

for Front Side with Connector

*B

w/o Pre-collision System

*C

w/ Pre-collision System

-

-

*a

90°

*b

Notch

*c

Clamp

-

-

Rotation Direction

-

-

(c) for Front Side with Connector:

(1) Disconnect the No. 1 roof wire from each notch.

(d) Using a clip remover, disengage the 3 clamps.

(e) Remove the No. 1 roof wire from the roof headlining assembly.

14. REMOVE NO. 1 ROOF WIRE (for TMMMS Made Moon Roof)

(a) Remove the adhesive tape from the roof headlining assembly.

Adhesive Tape

-

-

(b) Turn the 2 visor connectors counterclockwise approximately 90° and remove them from the roof headlining assembly.

*A

for Front Side with Connector

-

-

*a

90°

*b

Notch

*c

Clamp

-

-

Rotation Direction

-

-

(c) for Front Side with Connector:

(1) Disconnect the No. 1 roof wire from each notch.

(d) Using a clip remover, disengage the 3 clamps.

(e) Remove the No. 1 roof wire from the roof headlining assembly.