Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000025OVW |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: INTERIOR PANELS / TRIM: FRONT CONSOLE BOX (for G16E-GTS): INSTALLATION; 2023 MY GR Corolla [09/2022 - 11/2022] |
INSTALLATION
PROCEDURE
1. INSTALL INSTRUMENT PANEL CUP HOLDER ASSEMBLY
HINT:
Perform this procedure only when replacement of the instrument panel cup holder assembly.
(a) Install the instrument panel cup holder assembly with the 4 screws.
(b) Install the 4WD control switch (No. 2 combination switch assembly).
Click here
2. INSTALL CONSOLE BOX HOLE COVER
HINT:
Perform this procedure only when replacement of the console box hole cover.
Click here
3. INSTALL CONSOLE BOX ASSEMBLY
(a) Engage the 3 guides as shown in the illustration.
|
Install in this Direction
|
(b) Install the console box assembly with the 2 bolts and 2 screws.
(c) Engage the clamp.
4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
(a) Connect each connector.
(b) Engage the 12 clips and 3 claws as shown in the illustration to install the console cup holder box sub-assembly.
|
Install in this Direction
|
5. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
(a) Engage the 6 clips to install the parking brake hole cover sub-assembly as shown in the illustration.
|
Install in this Direction
|
6. INSTALL UPPER FRONT CONSOLE PANEL SUB-ASSEMBLY
Click here
7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Click here
8. INSTALL FRONT CONSOLE UPPER PANEL GARNISH
Click here
9. INSTALL FRONT NO. 2 CONSOLE BOX INSERT
Click here
10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
11. INSTALL FRONT NO. 1 CONSOLE BOX INSERT
Click here
12. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
|