Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000025OKH
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 - 11/2022]
Title: EXTERIOR PANELS / TRIM: FRONT BUMPER (for Sedan without Illumination): INSTALLATION; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]

INSTALLATION

CAUTION / NOTICE / HINT

for TMC Made:

HINT:

When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.

for Target Adjustment (Triangle Target):

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; ADVANCED DRIVER ASSISTANCE SYSTEM: MILLIMETER WAVE RADAR SENSOR (for TMC Made): TARGET ADJUSTMENT(TRIANGLE TARGET)

for Target Adjustment (Flat Surface Target):

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; ADVANCED DRIVER ASSISTANCE SYSTEM: MILLIMETER WAVE RADAR SENSOR (for TMC Made): TARGET ADJUSTMENT(FLAT SURFACE TARGET)

for Driving Adjustment:

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; ADVANCED DRIVER ASSISTANCE SYSTEM: MILLIMETER WAVE RADAR SENSOR (for TMC Made): DRIVING ADJUSTMENT

for TMMMS Made:

HINT:

When the front bumper is damaged or deformed due to an accident or contact with other objects, etc., or the bumper installation area on the body is repaired, it is necessary to perform millimeter wave radar sensor adjustment.

Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; ADVANCED DRIVER ASSISTANCE SYSTEM: MILLIMETER WAVE RADAR SENSOR (for TMMMS Made): ADJUSTMENT

PROCEDURE

1. INSTALL FRONT BUMPER ASSEMBLY

(a) Move the front bumper assembly into position and engage the 5 claws as shown in the illustration.

Install in this Direction

(b) Install the bolt and 2 screws.

(c) Connect the connector.

(d) Engage the 4 claws as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.

Install in this Direction

(e) Install the 10 screws.

(f) Engage the 2 claws as shown in the illustration.

Install in this Direction

HINT:

Use the same procedure for the RH side and LH side.

(g) Install the front bumper assembly with the 2 clips.

2. INSTALL RADIATOR SUPPORT OPENING COVER (for Gasoline Model)

(a) for TMMMS Made:

(1) Engage the guide as shown in the illustration.

Install in this Direction (1)

Install in this Direction (2)

(2) Install the radiator support opening cover with the 8 clips.

(b) for TMC Made:

(1) Install the radiator support opening cover with the 7 clips.

3. INSTALL RADIATOR SUPPORT OPENING COVER (for HV Model)

(a) Install the radiator support opening cover with the 6 clips.