EXTERIOR PANELS / TRIM: FRONT BUMPER (for Sedan without Illumination): DISASSEMBLY; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022

Last Modified: 05-13-2024	6.11:8.1.0	Doc ID: RM1000000025OKF
Model Year Start: 2023	Model: GR Corolla	Prod Date Range: [09/2022 - 11/2022]
Title: EXTERIOR PANELS / TRIM: FRONT BUMPER (for Sedan without Illumination): DISASSEMBLY; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]

DISASSEMBLY

PROCEDURE

1. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)

(a) for TMMMS Made:

(1) Remove the 2 screws.

(2) Disengage the 2 claws and guide as shown in the illustration to remove the front bumper extension mounting bracket.

Remove in this Direction

(b) for TMC Made:

(1) Remove the 2 screws.

(2) Disengage the 2 claws and guide as shown in the illustration to remove the front bumper extension mounting bracket.

Remove in this Direction

2. REMOVE NO. 3 RADIATOR TO SUPPORT SEAL

(a) Disengage the claw to remove the No. 3 radiator to support seal.

3. REMOVE NO. 2 RADIATOR TO SUPPORT SEAL

HINT:

Use the same procedure as for the No. 3 radiator to support seal.

4. REMOVE INNER RADIATOR GRILLE

(a) Disengage the 2 guides.

(b) Remove the 2 screws and 4 clips.

	Screw
	Clip

(d) Disengage the 11 claws to remove the inner radiator grille.

5. REMOVE HOOD TO FRONT END PANEL SEAL

(a) Disengage the 9 clips to remove the hood to front end panel seal.

6. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Pre-collision System)

for TMC Made: Click here

for TMMMS Made: Click here

7. REMOVE FRONT BUMPER PAD

(a) Remove the front bumper pad.

HINT:

Use the same procedure for the RH side and LH side.

8. REMOVE LOWER SIDE RADIATOR GRILLE LH (w/ Cover)

(a) for TMMMS Made:

(1) Disengage the 2 claws and guide as shown in the illustration.

*a	Hook
	Remove in this Direction

(2) Disengage the hook to remove the lower side radiator grille LH.

(b) for TMC Made:

(1) Disengage the 2 claws as shown in the illustration.

*a	Hook
	Remove in this Direction

(2) Disengage the hook to remove the lower side radiator grille LH.

9. REMOVE FRONT BUMPER HOLE COVER LH (w/ Cover)

(a) for TMMMS Made:

(1) Disengage the 2 claws and guide as shown in the illustration.

*a	Hook
	Remove in this Direction

(2) Disengage the hook to remove the front bumper hole cover LH.

(b) for TMC Made:

(1) Disengage the 2 claws and guide as shown in the illustration.

*a	Hook
	Remove in this Direction

(2) Disengage the hook to remove the front bumper hole cover LH.

10. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY

(a) for TMMMS Made:

(1) Remove the 4 screws.

(2) Disengage the 16 claws and guide to remove the lower radiator grille sub-assembly.

(b) for TMC Made:

(1) Remove the 4 screws.

(2) Disengage the 17 claws to remove the lower radiator grille sub-assembly.

11. REMOVE RADIATOR GRILLE

(a) Disengage the 10 claws to remove the radiator grille.

12. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/o Pre-collision System)

(a) Disengage the 4 claws and guide to remove the radiator grille (or front panel) emblem.

13. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/ Pre-collision System)

(a) Remove the screw.

(b) Disengage the 4 claws and guide to remove the radiator grille (or front panel) emblem.

14. REMOVE FRONT BUMPER MOULDING

(a) for TMMMS Made:

(1) Remove the 6 screws.

(2) Disengage the 14 claws to remove the front bumper moulding.

(b) for TMC Made:

(1) Remove the 2 screws.

(2) Disengage the 8 claws and 5 guides to remove the front bumper moulding.

15. REMOVE FOG LIGHT COVER LH

(a) Remove the clip.

(b) Disengage the 2 claws and guide to remove the fog light cover LH.

16. REMOVE FOG LIGHT COVER RH

HINT:

Use the same procedure as for the LH side.

17. REMOVE PIN HOLD CLIP

(a) Disengage the 4 claws as shown in the illustration to remove the 2 pin hold clips.

Remove in this Direction

HINT:

Use the same procedure for the RH side and LH side.

18. REMOVE FRONT FENDER LINER RETAINER

(a) Remove the 2 front fender liner retainers as shown in the illustration.

Remove in this Direction

HINT:

Use the same procedure for the RH side and LH side.

19. REMOVE FRONT BUMPER SIDE SUPPORT LH

(a) Remove the bolt.

(b) Disengage the clip and claw as shown in the illustration to remove the front bumper side support LH.

	Remove in this Direction (1)
	Remove in this Direction (2)

20. REMOVE FRONT BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.

21. REMOVE NO. 2 LOWER FRONT BUMPER RETAINER

(a) Disengage the claw to remove the No. 2 lower front bumper retainer.

22. REMOVE FRONT BUMPER ENERGY ABSORBER

(a) Disengage the 4 guides as shown in the illustration to remove the front bumper energy absorber.

Remove in this Direction

23. REMOVE FRONT BUMPER REINFORCEMENT

(a) Disengage each clamp.

(b) for TMMMS Made:

(1) Remove the clip.

Remove in this Direction

(d) Disengage the guide as shown in the illustration to remove the front bumper reinforcement.

24. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH

(a) Disengage each clamp.

(b) Remove the 4 bolts and front side member bracket sub-assembly LH as shown in the illustration.

Remove in this Direction

25. REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH

(a) Remove the 4 bolts and front side member bracket sub-assembly RH as shown in the illustration.

Remove in this Direction

26. REMOVE LOWER FRONT BUMPER ABSORBER

(a) Disengage the 2 guides as shown in the illustration to remove the lower front bumper absorber.

Remove in this Direction

27. REMOVE NO. 2 FRONT BUMPER REINFORCEMENT

(a) Remove the 2 nuts and No. 2 front bumper reinforcement as shown in the illustration.

Remove in this Direction

28. REMOVE FRONT BUMPER BRACKET LH

(a) Remove the 4 bolts and front bumper bracket LH as shown in the illustration.

Remove in this Direction

29. REMOVE FRONT BUMPER BRACKET RH

HINT:

Use the same procedure as for the LH side.