Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000025OGY |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 -
] |
Title: METER / GAUGE / DISPLAY: TRIP SWITCH: INSPECTION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] |
INSPECTION
PROCEDURE
1. INSPECT TRIP SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
5 (A/B) - 2 (E)
|
ODO/TRIP switch pressed
|
Below 50 Ω
|
ODO/TRIP switch not pressed
|
10 kΩ or higher
|
If the result is not as specified, replace the trip switch.
|
|
*a
|
Component without harness connected
(Trip Switch)
|
|
|
(b) Illumination Inspection
(1) Apply auxiliary battery voltage to the trip switch and check that it illuminates.
OK:
Condition
|
Specified Condition
|
Auxiliary battery positive (+) → Terminal 6 (ILL+)
Auxiliary battery negative (-) → Terminal 1 (ILL-)
|
Illuminates
|
If the result is not as specified, replace the trip switch.
|