| Last Modified: 11-29-2023 | 6.11:8.1.0 | Doc ID: RM1000000025JNN |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - ] |
| Title: LIGHTING (INT): ROOM LIGHT: REMOVAL; 2023 - 2024 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for Bulb Type)
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the room light lens.
|
*a |
Protective Tape |
|
Front |
(b) Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws as shown in the illustration to separate the room light housing.
|
*a |
Protective Tape |
|
|
Front |
|
Remove in this Direction |
(c) Disengage the clamp.
|
*1 |
Room Light Switch Base |
|
*a |
Protective Tape |
|
|
Front |
(d) Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the room light housing from the room light switch base.
2. REMOVE NO. 1 ROOM LIGHT BULB (for Bulb Type)
(a) Remove the No. 1 room light bulb from the room light switch base.
3. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (for LED Type)
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the room light lens.
|
*a |
Protective Tape |
|
|
Front |
(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and 2 guides and remove the 2 inner covers.
|
*a |
Protective Tape |
|
|
Front |
(c) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws as shown in the illustration to separate the room light housing.
|
*a |
Protective Tape |
|
|
Front |
|
|
Remove in this Direction |
(d) Disengage the clamp.
|
|
Front |
(e) Disconnect the connector and remove the room light housing.
|
|