| Last Modified: 12-11-2024 | 6.11:8.1.0 | Doc ID: RM1000000025JBN |
| Model Year Start: 2023 | Model: GR Corolla | Prod Date Range: [09/2022 - 09/2024] |
| Title: EXTERIOR PANELS / TRIM: REAR BUMPER (for Hatchback, GR): INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 09/2024] | ||
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
If the bumper is damaged, there is a possibility that the installation area of the blind spot monitor sensor may be deformed and the blind spot monitor system may not operate correctly, so visually inspect the blind spot monitor sensor installation area (frame, stud bolt) to make sure it is not dented or bent.
If the visual inspection finds a problem, check the installation condition of the blind spot monitor sensor, and adjust the installation position of the blind spot monitor sensor as necessary.
Click here
![2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; PARK ASSIST / MONITORING: BLIND SPOT MONITOR SENSOR: ADJUSTMENT](/t3Portal/stylegraphics/info.gif)
PROCEDURE
1. INSTALL REAR BUMPER ASSEMBLY
(a) Connect the connector.
(b) Engage the 4 claws as shown in the illustration.
|
Install in this Direction |
(c) Engage the 8 claws as shown in the illustration.
|
|
Install in this Direction |
HINT:
Use the same procedure for the RH side and LH side.
(d) Install the 10 clips.
(e) Install the clip.
HINT:
Use the same procedure for the RH side and LH side.
(f) Install the rear bumper assembly with the 2 screws.
2. INSTALL REAR COMBINATION LIGHT COVER LH
Click here
3. INSTALL REAR COMBINATION LIGHT COVER RH
HINT:
Use the same procedure as for the LH side.
|
|