Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM1000000025JB0
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 -           ]
Title: EXTERIOR PANELS / TRIM: NAME PLATE (for Hatchback): INSTALLATION; 2023 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 -        ]

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

When installing the name plates, heat the vehicle body, back door panel and name plates using a heat light.

Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

Name Plate

20 to 30°C (68 to 86°F)

CAUTION:

  • Do not touch the heat light and heated parts, touching the heat light may result in burns.
  • Touching heated parts for a long time may result in burns.

*a

Heated Part

*b

Heat Light

NOTICE:

Do not heat the vehicle body, back door panel or name plate excessively.

PROCEDURE

1. INSTALL NO. 2 FRONT FENDER NAME PLATE (for GR)

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove any remaining double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Using a heat light, heat the vehicle body and a new No. 2 front fender name plate as shown in the illustration.

(c) Remove the release paper from the No. 2 front fender name plate as shown in the illustration.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(d) Install the No. 2 front fender name plate as shown in the illustration.

*a

R End

-

-

Standard Measurement:

Area

Measurement

Area

Measurement

A

75.2 mm (2.96 in.)

B

71.7 mm (2.82 in.)

C

37.6 mm (1.48 in.)

D

17.2 mm (0.677 in.)

E

73.3 mm (2.89 in.)

F

22.1 mm (0.87 in.)

2. INSTALL NO. 1 FRONT FENDER NAME PLATE (for GR)

(a) Clean the vehicle body surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove any remaining double-sided tape from the vehicle body.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Using a heat light, heat the vehicle body and a new No. 1 front fender name plate as shown in the illustration.

(c) Remove the release paper from the No. 1 front fender name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(d) Install the No. 1 front fender name plate as shown in the illustration.

*a

R End

-

-

Standard Measurement:

Area

Measurement

Area

Measurement

A

74.7 mm (2.94 in.)

B

71.5 mm (2.81 in.)

C

37.3 mm (1.47 in.)

D

16.6 mm (0.654 in.)

E

67.4 mm (2.65 in.)

F

16.2 mm (0.638 in.)

3. INSTALL BACK DOOR NAME PLATE (for GR)

(a) Clean the back door panel surface.

(1) Using a heat light, heat the back door panel surface.

(2) Remove any remaining double-sided tape from the back door panel.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Using a heat light, heat the back door panel and a new back door name plate.

(c) Remove the release paper from the back door name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(d) Install the back door name plate as shown in the illustration.

Standard Measurement:

Area

Measurement

Area

Measurement

A

158.7 mm (6.25 in.)

B

99 mm (3.9 in.)

C

31.8 mm (1.25 in.)

D

61.6 mm (2.43 in.)

4. INSTALL NO. 4 BACK DOOR NAME PLATE (except GR)

(a) Clean the back door panel surface.

(1) Using a heat light, heat the vehicle body surface.

(2) Remove any remaining double-sided tape from the back door panel.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Using a heat light, heat the back door panel and a new No. 4 back door name plate.

(c) Remove the release paper from the No. 4 back door name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(d) for SE Plate:

(1) Install the No. 4 back door name plate as shown in the illustration.

Standard Measurement:

Area

Measurement

Area

Measurement

A

260.5 mm (10.26 in.)

B

13.7 mm (0.539 in.)

C

73.6 mm (2.90 in.)

D

64.5 mm (2.54 in.)

E

8.6 mm (0.339 in.)

F

32.0 mm (1.26 in.)

(e) for XSE Plate:

(1) Install the No. 4 back door name plate as shown in the illustration.

Standard Measurement:

Area

Measurement

Area

Measurement

A

228.1 mm (8.98 in.)

B

15.1 mm (0.595 in.)

C

106.2 mm (4.18 in.)

D

97.1 mm (3.82 in.)

E

8.3 mm (0.327 in.)

F

31.8 mm (1.25 in.)

5. INSTALL NO. 2 BACK DOOR NAME PLATE

(a) Clean the back door panel surface.

(1) Using a heat light, heat the back door panel surface.

(2) Remove any remaining double-sided tape from the back door panel.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Using a heat light, heat the back door panel and a new No. 2 back door name plate.

(c) Remove the release paper from the No. 2 back door name plate.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(d) except GR:

(1) Install the No. 2 back door name plate as shown in the illustration.

Standard Measurement:

Area

Measurement

Area

Measurement

A

9.1 mm (0.358 in.)

B

165.7 mm (6.52 in.)

C

17.1 mm (0.673 in.)

D

181.7 mm (7.15 in.)

(e) for GR:

(1) Install the No. 2 back door name plate as shown in the illustration.

Standard Measurement:

Area

Measurement

Area

Measurement

A

334.1 mm (13.2 in.)

B

172.9 mm (6.81 in.)

C

30.8 mm (1.21 in.)

D

22 mm (0.866 in.)

6. INSTALL SYMBOL EMBLEM

(a) Clean the back door panel surface.

(1) Using a heat light, heat the back door panel surface.

(2) Remove any remaining double-sided tape from the back door panel.

(3) Wipe off any tape adhesive residue with cleaner.

(b) Using a heat light, heat the back door panel and a new symbol emblem.

(c) Remove the release paper from the symbol emblem.

HINT:

After removing the release paper, keep the exposed adhesive free from foreign matter.

(d) Engage the 2 pins and install the symbol emblem as shown in the illustration.