| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM1000000025DTT |
| Model Year Start: 2023 | Model: Corolla | Prod Date Range: [09/2022 - ] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model): C05262A; Steering Angle Sensor Module Signal Stuck In Range; 2023 - 2025 MY Corolla Corolla HV [09/2022 - ] | ||
|
DTC |
C05262A |
Steering Angle Sensor Module Signal Stuck In Range |
DESCRIPTION
The skid control ECU (brake actuator assembly) determines the steering angle value based on data obtained from the steering angle sensor, yaw rate and acceleration sensor (airbag sensor assembly).
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
MIL |
DTC Output from |
Note |
|---|---|---|---|---|---|---|
|
C05262A |
Steering Angle Sensor Module Signal Stuck In Range |
When the change in steering angle sensor angle is 5° or less, left and right movements of the vehicle are detected. |
Steering angle sensor |
Does not come on |
Brake/EPB |
Output ECU: Skid control ECU (brake actuator assembly) |
PROCEDURE
|
1. |
REPLACE STEERING ANGLE SENSOR |
(a) Replace the steering angle sensor.
Click here
![2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: STEERING ANGLE SENSOR: REMOVAL](/t3Portal/stylegraphics/info.gif)
| NEXT |
|
END |
|
|