DESCRIPTIONThe main body ECU (multiplex network body ECU) controls the operation of the TAIL relay. WIRING DIAGRAMfor Hatchback for Sedan CAUTION / NOTICE / HINTNOTICE:
PROCEDURE
(a) Perform the Active Test according to the display on the GTS. Body Electrical > Main Body > Active Test
Body Electrical > Main Body > Active Test
OK: Taillights, accessory lights*1, parking lighst*2 and side marker lights illuminate.
(a) Disconnect the 8M power distribution box assembly connector. (b) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Choose the model to be inspected.
(a) Disconnect the 8H power distribution box assembly connector. (b) Disconnect the O42 rear combination light cord LH connector. (c) Disconnect the O43 rear combination light cord RH connector. (d) Disconnect the V8 rear light socket and wire LH connector. (e) Disconnect the V5 rear light socket and wire RH connector. (f) Disconnect the R9 license plate light assembly LH connector. (g) Disconnect the R8 license plate light assembly RH connector. (h) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(a) Connect the 8M power distribution box assembly connector. (b) Connect the 8H power distribution box assembly connector. (c) Turn the light control switch to the tail position. (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the O42 rear combination light cord LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the O43 rear combination light cord RH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the V8 rear light socket and wire LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the V5 rear light socket and wire RH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the R9 license plate light assembly LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the R9 license plate light assembly LH connector. (b) Connect the R8 license plate light assembly RH connector. (c) Turn the light control switch to the tail position. (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the rear light lens and body RH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the rear light lens and body LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the rear combination light lens and body RH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the rear combination light lens and body LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Choose the model to be inspected.
(a) Disconnect the 8F power distribution box assembly connector. (b) Disconnect the A134 headlight unit assembly LH connector.*1 (c) Disconnect the A132 headlight unit assembly RH connector.*1 (d) Disconnect the A26 headlight unit assembly LH connector.*1 (e) Disconnect the A25 headlight unit assembly RH connector.*1 (f) Disconnect the A120 LED illumination light LH connector.*2 (g) Disconnect the A119 LED illumination light RH connector.*2 (h) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(a) Connect the 8M power distribution box assembly connector. (b) Connect the 8F power distribution box assembly connector. (c) Turn the light control switch to the tail position. (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Choose the model to be inspected.
(a) Connect the 8F power distribution box assembly connector. (b) Connect the A134 headlight unit assembly LH connector. (c) Turn the light control switch to the tail position. (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the A132 headlight unit assembly RH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the A26 headlight unit assembly LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the A26 headlight unit assembly LH connector.. (b) Connect the A25 headlight unit assembly RH connector. (c) Turn the light control switch to the tail position. (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Choose the model to be inspected.
(a) Connect the 8F power distribution box assembly connector. (b) Connect the A120 LED illumination light LH connector. (c) Turn the light control switch to the tail position. (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the A120 LED illumination light LH connector. (b) Connect the A119 LED illumination light RH connector. (c) Turn the light control switch to the tail position. (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the 8H power distribution box assembly connector. (b) Disconnect the O113 license plate light assembly LH connector. (c) Disconnect the O110 rear light socket and wire LH connector.*1 (d) Disconnect the O109 rear light socket and wire RH connector.*1 (e) Disconnect the O104 rear combination light cord LH connector.*1 (f) Disconnect the O103 rear combination light cord RH connector.*1 (g) Disconnect the O104 rear combination light assembly LH connector.*2 (h) Disconnect the O103 rear combination light assembly RH connector.*2 (i) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(a) Connect the 8M power distribution box assembly connector. (b) Connect the 8H power distribution box assembly connector. (c) Turn the light control switch to the tail position. (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the O113 license plate light assembly LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Choose the model to be inspected.
(a) Connect the O110 rear light socket and wire LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the O109 rear light socket and wire RH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the O104 rear combination light cord LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the O104 rear combination light cord LH connector. (b) Connect the O103 rear combination light cord RH connector. (c) Turn the light control switch to the tail position. (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the rear combination light lens and body RH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the rear combination light LED RH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the rear combination light lens and body LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the rear combination light LED LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the rear light lens and body RH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the rear light lens and body LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Connect the O104 rear combination light assembly LH connector. (b) Turn the light control switch to the tail position. (c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Disconnect the O104 rear combination light assembly LH connector. (b) Connect the O103 rear combination light assembly RH connector. (c) Turn the light control switch to the tail position. (d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
|