DESCRIPTIONThis DTC is stored when the sliding roof ECU (sliding roof drive gear sub-assembly) has not been initialized.
WIRING DIAGRAMRefer to DTC B2341. CAUTION / NOTICE / HINTNOTICE: If the sliding roof ECU (sliding roof drive gear sub-assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear sub-assembly) must be initialized. HINT: When DTC B2342 and B2343 are output simultaneously, perform troubleshooting for DTC B2342 first. PROCEDURE
(a) Check that the sliding roof ECU (sliding roof drive gear sub-assembly) can be initialized. OK: Sliding roof ECU (sliding roof drive gear sub-assembly) can be initialized.
(a) Check the sliding roof auto operation. OK: Auto operation operates normally.
(a) Clear the DTCs. Body Electrical > Sliding Roof > Clear DTCs(b) Check for DTCs. Body Electrical > Sliding Roof > Trouble CodesOK: DTC B2343 is not output.
|