Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000002595H |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: ADVANCED DRIVER ASSISTANCE SYSTEM: MILLIMETER WAVE RADAR SENSOR (for TMMMS Made): REMOVAL; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during millimeter wave radar sensor assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Millimeter wave radar sensor assembly
|
Adjust millimeter wave radar sensor assembly
|
-
Front Radar Sensor System
-
Pre-collision System
-
Dynamic Radar Cruise Control System
-
Lane Tracing Assist System
-
Lane Departure Alert System
-
Road Sign Assist System
-
Automatic High Beam System
|
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
w/o LED Illumination Light on Front Bumper: Click here
w/ LED Illumination Light on Front Bumper: Click here
2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
(a) Remove the inner radiator grille.
w/o LED Illumination Light on Front Bumper: Click here
w/ LED Illumination Light on Front Bumper: Click here
(b) Remove the 2 bolts and screw.
|
Bolt
|
|
Screw
|
(c) Disengage the 2 guides and remove the millimeter wave radar sensor assembly.
NOTICE:
Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.
|