Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000025959 |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: ADVANCED DRIVER ASSISTANCE SYSTEM: CAMERA HEATER (for TMMMS Made): INSTALLATION; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] |
INSTALLATION
PROCEDURE
1. INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY
NOTICE:
-
Do not touch the inner surface of the forward recognition with heater hood sub-assembly.
|
Inner Surface of Forward Recognition with Heater Hood Sub-assembly
|
-
Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.
(a) Engage the 2 guides and 2 claws as indicated by the arrows in the order shown in the illustration.
|
Heater Area
|
|
Install in this Direction (1)
|
|
Install in this Direction (2)
|
NOTICE:
-
Make sure that the 2 claws are engaged as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.
-
Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.
(b) Engage the clamp and 3 ribs to install the forward recognition with heater hood sub-assembly.
NOTICE:
-
As the No. 1 forward recognition cover cannot be installed correctly if the clamp and ribs are not engaged securely, make sure to engage each clamp and rib securely.
-
Do not forcibly pull the wire harness as it may become damaged.
HINT:
Engage the clamp and ribs in the order shown in the illustration.
|
|
(c) Connect the connector.
2. INSTALL FORWARD RECOGNITION CAMERA
Click here
|