Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM1000000025951 |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: ADVANCED DRIVER ASSISTANCE SYSTEM: FRONT CAMERA (for TMMMS Made): REMOVAL; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during forward recognition camera removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Forward recognition camera
|
Adjust forward recognition camera
|
-
Front Camera System
-
Pre-collision System
-
Dynamic Radar Cruise Control System
-
Lane Tracing Assist System
-
Lane Departure Alert System
-
Road Sign Assist System
-
Automatic High Beam System
|
One Time Recognition:
Sequential Recognition:
|
NOTICE:
-
When replacing the forward recognition camera, replace it with a new one.
-
Do not touch the camera lens or the front windshield glass in front of the camera.
-
If the forward recognition camera has been struck or dropped, replace it with a new one.
-
When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the dynamic radar cruise control system, lane tracing assist system, lane departure alert system, road sign assist system, pre-collision system, front camera system or automatic high beam system may not operate properly due to a difference in the transmissivity or black ceramic border.
PROCEDURE
1. REMOVE NO. 2 FORWARD RECOGNITION COVER
(a) Pull the No. 2 forward recognition cover in the direction indicated by the arrow (1) shown in the illustration to disengage the 2 claws.
NOTICE:
If these claws are disengaged separately, they may break. Insert a molding remover between them and pull it down to disengage the claws simultaneously.
|
Remove in this Direction (1)
|
|
Remove in this Direction (2)
|
(b) Pull the No. 2 forward recognition cover in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the No. 2 forward recognition cover.
2. REMOVE NO. 1 FORWARD RECOGNITION COVER
(a) Disengage the 2 clips and 2 guides to remove the No. 1 forward recognition cover as shown in the illustration.
NOTICE:
To avoid damaging the guides, always slide the No. 1 forward recognition cover parallel to the windshield glass.
|
Remove in this Direction
|
3. REMOVE FORWARD RECOGNITION LATCH
(a) Disengage the 2 claws in the direction indicated by the arrow (1) shown in the illustration.
|
Remove in this Direction (1)
|
|
Remove in this Direction (2)
|
(b) Disengage the 4 guides in the direction indicated by the arrow (2) shown in the illustration to remove the forward recognition latch.
4. REMOVE FORWARD RECOGNITION CAMERA
NOTICE:
If the forward recognition camera has been struck or dropped, replace it with a new one.
(a) Disconnect the connector.
|
Remove in this Direction
|
NOTICE:
Do not pull the harness forcibly when disconnecting the connector.
(b) Disengage the 4 guides and remove the forward recognition camera as shown in the illustration.
NOTICE:
-
Do not touch the camera lens.
-
If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.
|