Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM10000000257A8
Model Year Start: 2023 Model: GR Corolla Prod Date Range: [09/2022 - 11/2022]
Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM (except 12.3 Inch Display): DATA LIST / ACTIVE TEST; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Read the Data List according to the display on the GTS.

(1) Combination Meter

HINT:

Depending on the specifications of the vehicle, some items may not be displayed.

Body Electrical > Combination Meter > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Total distance traveled

Min.: 0, Max.: 16777215

-

-

Total Distance Traveled - Unit

Total distance traveled unit

km or mile

-

-

ODO/TRIP Change Switch

ODO/TRIP switch operation

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Light Control Switch (UP)

Light control rheostat up switch operation

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Light Control Switch (DOWN)

Light control rheostat down switch operation

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Up)

Up switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Down)

Down switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Left)

Left switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Right)

Right switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Enter)

OK switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

Multi Switch (Back)

Back switch on steering pad switch

OFF or ON

OFF: Switch released

ON: Switch pushed

-

+B Voltage

Auxiliary battery voltage

(Combination meter assembly input)

Min.: 0.0 V, Max.: 25.5 V or Unset

11 to 14 V

-

Fuel Input

Fuel level input

Min.: 0.00 L, Max.: 655.35 L or Unset

for HV Model

except 4WD

  • Fuel receiver gauge indicates F: 37.82 L
  • Fuel receiver gauge indicates 3/4: 29.43 L
  • Fuel receiver gauge indicates 1/2: 21.04 L
  • Fuel receiver gauge indicates 1/4: 12.64 L
  • Fuel receiver gauge indicates E: 4.25 L

for 4WD

  • Fuel receiver gauge indicates F: 35.58 L
  • Fuel receiver gauge indicates 3/4: 27.78 L
  • Fuel receiver gauge indicates 1/2: 19.99 L
  • Fuel receiver gauge indicates 1/4: 12.19 L
  • Fuel receiver gauge indicates E: 4.39 L

for Gasoline Model

for TMC Made (50liter model)

  • Fuel receiver gauge indicates F: 44.50 L
  • Fuel receiver gauge indicates 3/4: 34.63 L
  • Fuel receiver gauge indicates 1/2: 24.75 L
  • Fuel receiver gauge indicates 1/4: 14.88 L
  • Fuel receiver gauge indicates E: 5.00 L

for TMC Made (47liter model)

  • Fuel receiver gauge indicates F: 41.86 L
  • Fuel receiver gauge indicates 3/4: 32.57 L
  • Fuel receiver gauge indicates 1/2: 23.28 L
  • Fuel receiver gauge indicates 1/4: 13.99 L
  • Fuel receiver gauge indicates E: 4.70 L

for TMMMS Made, M20A-FKS

  • Fuel receiver gauge indicates F: 45.00 L
  • Fuel receiver gauge indicates 3/4: 35.00 L
  • Fuel receiver gauge indicates 1/2: 25.00 L
  • Fuel receiver gauge indicates 1/4: 15.00 L
  • Fuel receiver gauge indicates E: 5.00 L

for TMMMS Made, 2ZR-FAE, w/ Canister Pump Module

  • Fuel receiver gauge indicates F: 45.00 L
  • Fuel receiver gauge indicates 3/4: 35.00 L
  • Fuel receiver gauge indicates 1/2: 25.00 L
  • Fuel receiver gauge indicates 1/4: 15.00 L
  • Fuel receiver gauge indicates E: 5.00 L

for TMMMS Made, 2ZR-FAE, w/o Canister Pump Module

  • Fuel receiver gauge indicates F: 44.85 L
  • Fuel receiver gauge indicates 3/4: 34.99 L
  • Fuel receiver gauge indicates 1/2: 25.00 L
  • Fuel receiver gauge indicates 1/4: 15.00 L
  • Fuel receiver gauge indicates E: 5.00 L

The detected value of the fuel sender gauge assembly is displayed.

Rheostat value

Meter illumination level input

Min.: 0.00%, Max.: 100.01% or Unset

The value increases in proportion to the brightness

-

Vehicle Speed Meter

Vehicle speed input

Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) or Unset

Almost the same as actual speedometer

The value displayed on the speedometer may deviate.*

Engine RPM

Engine speed input

Min.: 0 rpm, Max.: 12701 rpm or Unset

Almost the same as actual tachometer

The value displayed on the tachometer may deviate.*

Washer Level Warning Switch

Washer fluid level warning switch input

OFF or ON

OFF: Washer fluid level not low

ON: Washer fluid level low

-

Driver Buckle Switch

Seat belt buckle switch input

(for Driver seat)

Fastened or Not Fastened

Fastened: Driver seat belt buckle switch fastened

Not Fastened: Driver seat belt buckle switch unfastened

-

Hazard Flasher Switch

Hazard warning signal switch input

OFF or ON

OFF: Hazard warning signal switch off

ON: Hazard warning signal switch on

-

Ambient Temperature (Celsius)

Outside temperature input

(Celsius)

Min.: -40.0°C, Max.: 87.1°C or Unset

Almost the same as actual outside temperature

-

Ambient Temperature (Fahrenheit)

Outside temperature input

(Fahrenheit)

Min.: -40°F, Max.: 215°F or Unset

Almost the same as actual outside temperature

-

Lighting System

Existence of headlight ECU

Without or With

Without: w/o Headlight ECU

With: w/ Headlight ECU

-

Oil Pressure Switch

Engine oil pressure switch input

OFF or ON

OFF: Engine started

ON: Engine not started

-

Oil Level Switch

Engine oil level sensor input

OFF or ON

OFF: Engine oil level not low

ON: Engine oil level low

-

Coolant Temperature

Engine coolant temperature input

Min.: 0.0°C, Max.: 127.1°C or Unset

75 to 100°C: After warming up engine

-

Integrated value for Maintenance

Maintenance required reminder value

Min.: 0 miles, Max.: 25401 miles or Unset

Driving distance after performing maintenance required reminder reset procedure displayed

-

Brake Fluid Amount

Brake fluid level warning switch input

OK or Low

OK: Brake fluid level normal

Low: Brake fluid level abnormal

-

Brake Negative Pressure

Vacuum warning switch input

OK or NG

OK: Brake vacuum pressure normal

NG: Brake vacuum pressure abnormal

-

TPMS System

Existence of tire pressure warning system

Without or With

Without: w/o Tire Pressure Warning System

With: w/ Tire Pressure Warning System

-

VGRS System

Existence of variable gear ratio steering system

Without or With

Without: w/o Variable Gear Ratio Steering System

With: w/ Variable Gear Ratio Steering System

-

VSC System

Existence of electronically controlled brake system

Without or With

Without: w/o Electronically Controlled Brake System

With: w/ Electronically Controlled Brake System

-

DRS System

Existence of dynamic rear steering system

Without or With

Without: w/o Dynamic Rear Steering System

With: w/ Dynamic Rear Steering System

-

Pop Up Hood System

Existence of pop up hood

Without or With

Without: w/o Pop up Hood

With: w/ Pop up Hood

-

AVS System

Existence of adaptive variable suspension system

Without or With

Without: w/o Adaptive Variable Suspension System

With: w/ Adaptive Variable Suspension System

-

LDA System

Existence of lane tracing assist system

Without or With

Without: w/o Lane Tracing Assist System

With: w/ Lane Tracing Assist System

-

PCS System

Existence of pre-collision system

Without or With

Without: w/o Pre-collision System

With: w/ Pre-collision System

-

ICS System

Existence of parking support brake system

Without or With

Without: w/o Parking Support Brake System

With: w/ Parking Support Brake System

-

Radar Cruise System

Existence of dynamic radar cruise control system

Without or With

Without: w/o Dynamic Radar Cruise Control System

With: w/ Dynamic Radar Cruise Control System

-

Intuitive P/A System

Existence of intuitive parking assist system

Without or With

Without: w/o Intuitive Parking Assist System

With: w/ Intuitive Parking Assist System

-

Road Sign Assist System

Existence of road sign assist system

Without or With

Without: w/o Road Sign Assist System

With: w/ Road Sign Assist System

-

HV/EV System Indicator

Hybrid system indicator value

Min.: -101%, Max.: 511% or Unset

See [Normal Condition 1]

"Unset" is displayed when the vehicle is stopped and the ignition switch is ON (READY).

ODO Display Time After IG OFF Adjust

Setting of trip result display time after the ignition switch is turned off

30s, 60s, 600s or OFF

-

If it is possible to customize the setting, the current setting is displayed.

Tail Remind Buzzer Function

Setting of tail remind buzzer function

OFF or ON

Displays customize setting of Tail Remind Buzzer Function

-

Flasher Sound Volume Adjust

Setting of flasher sound volume adjustment

Large, Medium or Small

-

If it is possible to customize the setting, the current setting is displayed.

FCTA System

Existence of FCTA function

Without or With

Without: w/o FCTA function

With: w/ FCTA function

-

Navigation System

Existence of navigation system

Without or With

Without: w/o Navigation System

With: w/ Navigation System

-

Nonvolatile Memory Status

Combination meter assembly internally stored information status

Abnormal or Normal

Abnormal: Combination meter assembly internally stored information reading impossible

Normal: Combination meter assembly internally stored information reading possible

-

Illumination Rate from Sensitivity Sensor

Automatic light control sensor input

Min.: 0 lx, Max.: 65535 lx or Unset

Almost the same as actual ambient light level

0 is displayed when there is no light.

Reverse Buzzer Setting

Setting of reverse buzzer

Mute or Continual

Displays customize setting of Reverse Buzzer Setting

-

  • *: For the tolerance of each meter, refer to Operation Check.

    Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM (except 12.3 Inch Display): OPERATION CHECK

HINT:

[Normal Condition 1]: HV/EV System Indicator

  • Refer to the following table to find the approximate indicated value of the hybrid system indicator based on the value of the Data List item:

    Data List: HV/EV System Indicator (%)

    Hybrid System Indicator Indication

    Unset

    Not indicated

    -100

    Approximately 1 is indicated

    -50

    Approximately 2 is indicated

    0

    Approximately 3 is indicated

    50

    Approximately 4 is indicated

    100

    Approximately 5 is indicated

    200

    Approximately 6 is indicated

    300

    Approximately 7 is indicated

    400

    Approximately 8 is indicated

    500

    Approximately 9 is indicated

    *A

    for 7 Inch Type Multi-information Display

ACTIVE TEST

HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Perform the Active Test according the display on the GTS.

HINT:

Depending on the specifications of the vehicle, some items may not be displayed.

Body Electrical > Combination Meter > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

TachoMeter Operation (0rpm)

Tachometer

(0 rpm)

ON

-

TachoMeter Operation (1000rpm)

Tachometer

(1000 rpm)

ON

The value displayed on the tachometer may deviate.*

TachoMeter Operation (2000rpm)

Tachometer

(2000 rpm)

ON

The value displayed on the tachometer may deviate.*

TachoMeter Operation (3000rpm)

Tachometer

(3000 rpm)

ON

The value displayed on the tachometer may deviate.*

TachoMeter Operation (4000rpm)

Tachometer

(4000 rpm)

ON

The value displayed on the tachometer may deviate.*

TachoMeter Operation (5000rpm)

Tachometer

(5000 rpm)

ON

The value displayed on the tachometer may deviate.*

TachoMeter Operation (6000rpm)

Tachometer

(6000 rpm)

ON

The value displayed on the tachometer may deviate.*

TachoMeter Operation (7000rpm)

Tachometer

(7000 rpm)

ON

The value displayed on the tachometer may deviate.*

TachoMeter Operation (8000rpm)

Tachometer

(8000 rpm)

ON

-

TachoMeter Operation (9000rpm)

Tachometer

(9000 rpm)

ON

-

TachoMeter Operation (10000rpm)

Tachometer

(10000 rpm)

ON

-

Fuel Gauge Operation (Sender E)

Fuel receiver gauge

(Fuel sender gauge lower limit)

ON

See [Display 1]

Fuel Gauge Operation (Empty)

Fuel receiver gauge

(Fuel receiver gauge indicates E)

ON

See [Display 1]

Fuel Gauge Operation (Warning)

Fuel receiver gauge

(Position at which fuel level warning light turns on/off)

ON

See [Display 1]

Fuel Gauge Operation (1/4)

Fuel receiver gauge

(Fuel receiver gauge indicates 1/4)

ON

See [Display 1]

Fuel Gauge Operation (1/2)

Fuel receiver gauge

(Fuel receiver gauge indicates 1/2)

ON

See [Display 1]

Fuel Gauge Operation (3/4)

Fuel receiver gauge

(Fuel receiver gauge indicates 3/4)

ON

See [Display 1]

Fuel Gauge Operation (Full)

Fuel receiver gauge

(Fuel receiver gauge indicates F)

ON

See [Display 1]

Fuel Gauge Operation (Sender F)

Fuel receiver gauge

(Fuel sender gauge upper limit)

ON

See [Display 1]

Water Temperature Meter Operation (50C,122F)

Engine coolant temperature receiver gauge

(50°C, 122°F)

ON

-

Water Temperature Meter Operation (60C,140F)

Engine coolant temperature receiver gauge

(60°C, 140°F)

ON

-

Water Temperature Meter Operation (70C,158F)

Engine coolant temperature receiver gauge

(70°C, 158°F)

ON

-

Water Temperature Meter Operation (80C,176F)

Engine coolant temperature receiver gauge

(80°C, 176°F)

ON

-

Water Temperature Meter Operation (Middle)

Engine coolant temperature receiver gauge

(Middle)

ON

-

Water Temperature Meter Operation (110C,230F)

Engine coolant temperature receiver gauge

(110°C, 230°F)

ON

-

Water Temperature Meter Operation (120C,248F)

Engine coolant temperature receiver gauge

(120°C, 248°F)

ON

-

Water Temperature Meter Operation (127C,260F)

Engine coolant temperature receiver gauge

(127°C, 260°F)

ON

-

Buzzer Operation (800Hz, Vol L, W/ Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Large
  • Fading tone

ON

-

Buzzer Operation (800Hz, Vol L, W/O Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Large
  • Continuous tone

ON

-

Buzzer Operation (800Hz, Vol S, W/ Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Small
  • Fading tone

ON

-

Buzzer Operation (800Hz, Vol S, W/O Damping)

Combination meter buzzer

  • Frequency: 800Hz
  • Volume: Small
  • Continuous tone

ON

-

Buzzer Operation (1.6kHz, Vol S, W/O Damping)

Combination meter buzzer

  • Frequency: 1.6kHz
  • Volume: Small
  • Continuous tone

ON

-

Buzzer Operation (2.4kHz, Vol L, W/O Damping)

Combination meter buzzer

  • Frequency: 2.4kHz
  • Volume: Large
  • Continuous tone

ON

-

Multi Display All (White)

Multi-information display

(White color display)

ON

-

Multi Display Default Screen

Multi-information display

(Default screen)

ON

-

Fuel Gauge Indicator

Fuel level warning light

OFF or ON

-

High Beam Indicator

High beam indicator light

OFF or ON

-

Headlamp Indicator

Head indicator light

OFF or ON

-

Taillamp Indicator

Tail indicator light

OFF or ON

-

Front Fog Lamp Indicator

Front fog indicator light

OFF or ON

-

Rear Fog Lamp Indicator

Rear fog indicator light

OFF or ON

-

Automatic High Beam Indicator (Green)

Automatic high beam/adaptive high beam indicator light

OFF or ON

-

Left Turn Signal Indicator

Turn indicator light

(LH side)

OFF or ON

-

Right Turn Signal Indicator

Turn indicator light

(RH side)

OFF or ON

-

Driver Side Seat Belt Warning

Driver or front passenger seat belt warning light

OFF or ON

-

Airbag Warning

SRS warning light

OFF or ON

-

Check Engine Warning

MIL (Check engine warning light)

OFF or ON

-

Brake Warning

Brake warning light / red (malfunction)

OFF or ON

-

Park Warning

Parking brake indicator light

OFF or ON

-

ABS Warning

ABS warning light

OFF or ON

-

ECB Warning

Brake warning light / yellow (minor malfunction)

OFF or ON

-

Slip Warning

Slip indicator light

OFF or ON

-

VSC OFF Indicator

VSC OFF indicator light

OFF or ON

-

Brake Hold Indicator

Brake hold standby indicator light

OFF or ON

-

Hold Indicator

Brake hold operated indicator light

OFF or ON

-

EPS Warning

EPS warning light

(Red)

OFF or ON

-

PPS Warning

EPS warning light

(Amber)

OFF or ON

-

PCS OFF Warning

PCS warning light

OFF or ON

-

INTUITIVE P/A LCD OFF Indicator

INTUITIVE P/A LCD OFF indicator light

OFF or ON

-

Ready Indicator

Ready indicator light

OFF or ON

-

EV Drive Indicator

EV Drive indicator light

OFF or ON

-

ADAS Integrated Warning

Driving assist information indicator light

OFF or ON

-

Speed Signal Input (0)

Vehicle speed test signal input

ON

When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.

Speed Signal Input (40)

Vehicle speed test signal input

ON

  • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
  • The value displayed on the speedometer may deviate.*

Speed Signal Input (80)

Vehicle speed test signal input

ON

  • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
  • The value displayed on the speedometer may deviate.*

Speed Signal Input (120)

Vehicle speed test signal input

ON

  • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
  • The value displayed on the speedometer may deviate.*

Speed Signal Input (160)

Vehicle speed test signal input

ON

  • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
  • for Speedometer Unit km/h Type:

    The value displayed on the speedometer may deviate.*

  • for Speedometer Unit MPH Type:

    The value displayed on the speedometer may deviate.

Speed Signal Input (200)

Vehicle speed test signal input

ON

  • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
  • for Speedometer Unit km/h Type:

    The value displayed on the speedometer may deviate.*

  • for Speedometer Unit MPH Type:

    When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.

Speed Signal Input (240)

Vehicle speed test signal input

ON

  • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
  • for Speedometer Unit km/h Type:

    The value displayed on the speedometer may deviate.*

  • for Speedometer Unit MPH Type:

    When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.

Speed Signal Input (280)

Vehicle speed test signal input

ON

  • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
  • When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.

Speed Signal Input (320)

Vehicle speed test signal input

ON

  • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
  • When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.

Speed Signal Input (360)

Vehicle speed test signal input

ON

  • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
  • When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.

Speed Signal Input (400)

Vehicle speed test signal input

ON

  • When this Active Test is performed, an actual vehicle speed signal is sent via CAN communication to the combination meter assembly to operate the speedometer. The seat belt warning buzzer, etc. may operate when performing this Active Test.
  • When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.

ODO/TRIP Change Switch

Performs the same operation as pressing the ODO/TRIP switch

OFF or ON

-

Light Control Switch (UP)

Performs the same operation as pressing the light control rheostat up switch

OFF or ON

-

Light Control Switch (DOWN)

Performs the same operation as pressing the light control rheostat down switch

OFF or ON

-

Multi Switch (Up)

Performs the same operation as pressing the up switch on steering pad switch (w/o Touch Tracer Operation)

OFF or ON

-

Multi Switch (Down)

Performs the same operation as pressing the down switch on steering pad switch (w/o Touch Tracer Operation)

OFF or ON

-

Multi Switch (Left)

Performs the same operation as pressing the left switch on steering pad switch (w/o Touch Tracer Operation)

OFF or ON

-

Multi Switch (Right)

Performs the same operation as pressing the right switch on steering pad switch (w/o Touch Tracer Operation)

OFF or ON

-

Multi Switch (Enter)

Performs the same operation as pressing the OK switch on steering pad switch (w/o Touch Tracer Operation)

OFF or ON

-

Multi Switch (Back)

Performs the same operation as pressing the back switch on steering pad switch (w/o Touch Tracer Operation)

OFF or ON

-

Intuitive P/A Front Buzzer (Short)

Clearance warning buzzer

  • Detection direction: Front
  • Detection range: Near

ON

-

Intuitive P/A Front Buzzer (Middle)

Clearance warning buzzer

  • Detection direction: Front
  • Detection range: Middle

ON

-

Intuitive P/A Front Buzzer (Far)

Clearance warning buzzer

  • Detection direction: Front
  • Detection range: Far

ON

-

Intuitive P/A Front Buzzer (Farthest)

Clearance warning buzzer

  • Detection direction: Front
  • Detection range: Farthest

ON

-

Intuitive P/A Rear Buzzer (Short)

Clearance warning buzzer

  • Detection direction: Rear
  • Detection range: Near

ON

-

Intuitive P/A Rear Buzzer (Middle)

Clearance warning buzzer

  • Detection direction: Rear
  • Detection range: Middle

ON

-

Intuitive P/A Rear Buzzer (Far)

Clearance warning buzzer

  • Detection direction: Rear
  • Detection range: Far

ON

-

Intuitive P/A Rear Buzzer (Farthest)

Clearance warning buzzer

  • Detection direction: Rear
  • Detection range: Farthest

ON

-

Intuitive P/A Front/Rear Buzzer (Short)

Clearance warning buzzer

  • Detection direction: Front or rear
  • Detection range: Near

ON

-

Intuitive P/A Front/Rear Buzzer (Middle)

Clearance warning buzzer

  • Detection direction: Front or rear
  • Detection range: Middle

ON

-

Intuitive P/A Front/Rear Buzzer (Far)

Clearance warning buzzer

  • Detection direction: Front or rear
  • Detection range: Far

ON

-

Intuitive P/A Front/Rear Buzzer (Farthest)

Clearance warning buzzer

  • Detection direction: Front or rear
  • Detection range: Farthest

ON

-

Regulation Buzzer

Seat belt warning buzzer

  • Regulation sound

ON

-

Level2 Buzzer

Seat belt warning buzzer

  • Sounds intermittently
  • 1.4 seconds cycle

ON

-

Level1 Buzzer

Seat belt warning buzzer

  • Sounds intermittently
  • 2 seconds cycle

ON

-

Buckle Buzzer

Seat belt warning buzzer

  • Regulation once

ON

-

Master Caution Buzzer

Master warning buzzer

ON

-

Flasher Buzzer (Startup Sound)

Turn signal flasher buzzer

ON

-

Flasher Buzzer (Finish Sound)

Turn signal flasher buzzer

ON

-

  • *: For the tolerance of each meter, refer to Operation Check.

    Click here 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022]; METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM (except 12.3 Inch Display): OPERATION CHECK

HINT:

[Display 1]: Fuel Gauge Operation(for TMC Made)

  • *A

    for 4.2 Inch Type Multi-information Display

    Refer to the following table for the specified fuel receiver gauge position for each selected value:

    for 4.2 Inch Type Multi-information Display

    Tester Display

    Fuel Receiver Gauge Indication

    Fuel Gauge Operation

    (Sender E)

    Approximately 1 is indicated

    Fuel Gauge Operation

    (Empty)

    Approximately 2 is indicated

    Fuel Gauge Operation

    (Warning)

    Approximately 3 is indicated

    Fuel Gauge Operation

    (1/4)

    Approximately 4 is indicated

    Fuel Gauge Operation

    (1/2)

    Approximately 5 is indicated

    Fuel Gauge Operation

    (3/4)

    Approximately 6 is indicated

    Fuel Gauge Operation

    (Full)

    Approximately 7 is indicated

    Fuel Gauge Operation

    (Sender F)

    Approximately 8 is indicated

    for 7 Inch Type Multi-information Display

    Tester Display

    Fuel Receiver Gauge Indication

    Fuel Gauge Operation

    (Sender E)

    Segments illuminate 0/8

    Fuel Gauge Operation

    (Empty)

    Segments illuminate 1/8

    Fuel Gauge Operation

    (Warning)

    Segments illuminate 1/8

    Fuel Gauge Operation

    (1/4)

    Segments illuminate 2/8

    Fuel Gauge Operation

    (1/2)

    Segments illuminate 4/8

    Fuel Gauge Operation

    (3/4)

    Segments illuminate 6/8

    Fuel Gauge Operation

    (Full)

    Segments illuminate 8/8

    Fuel Gauge Operation

    (Sender F)

    Segments illuminate 8/8

    *A

    for 7 Inch Type Multi-information Display

[Display 1]: Fuel Gauge Operation(for TMMMS Made)

  • Refer to the following table for the specified fuel receiver gauge position for each selected value:

    *A

    for 4.2 Inch Type Multi-information Display

    *B

    for 7 Inch Type Multi-information Display

    for 4.2 Inch Type Multi-information Display

    Tester Display

    Fuel Receiver Gauge Indication

    Fuel Gauge Operation

    (Sender E)

    Approximately 1 is indicated

    Fuel Gauge Operation

    (Empty)

    Approximately 2 is indicated

    Fuel Gauge Operation

    (Warning)

    Approximately 3 is indicated

    Fuel Gauge Operation

    (1/4)

    Approximately 4 is indicated

    Fuel Gauge Operation

    (1/2)

    Approximately 5 is indicated

    Fuel Gauge Operation

    (3/4)

    Approximately 6 is indicated

    Fuel Gauge Operation

    (Full)

    Approximately 7 is indicated

    Fuel Gauge Operation

    (Sender F)

    Approximately 8 is indicated

    for 7 Inch Type Multi-information Display

    Tester Display

    Fuel Receiver Gauge Indication

    Fuel Gauge Operation

    (Sender E)

    Approximately 1 is indicated

    Fuel Gauge Operation

    (Empty)

    Approximately 2 is indicated

    Fuel Gauge Operation

    (Warning)

    Approximately 3 is indicated

    Fuel Gauge Operation

    (1/4)

    Approximately 4 is indicated

    Fuel Gauge Operation

    (1/2)

    Approximately 5 is indicated

    Fuel Gauge Operation

    (3/4)

    Approximately 6 is indicated

    Fuel Gauge Operation

    (Full)

    Approximately 7 is indicated

    Fuel Gauge Operation

    (Sender F)

    Approximately 8 is indicated