Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000002579R |
Model Year Start: 2023 |
Model: GR Corolla |
Prod Date Range: [09/2022 - 11/2022] |
Title: METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM (for 12.3 Inch Display): Tachometer Malfunction; 2023 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2022 - 11/2022] |
DESCRIPTION
-
The combination meter assembly receives engine speed signals from the ECM via CAN communication. The combination meter assembly displays the engine speed calculated based on the data received from the ECM.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
-
When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
-
When replacing the combination meter assembly, update the ECU security key.
Click here
-
When replacing the ECM, update the ECU security key.
Click here
-
Before replacing the ECM, refer to Registration.
Click here
PROCEDURE
1.
|
CHECK CAN COMMUNICATION SYSTEM
|
(a) Check if CAN communication DTCs are output.
Click here
Result
|
Proceed to
|
CAN communication DTCs are not output
|
A
|
CAN communication DTCs are output
|
B
|
A
|
|
|
2.
|
CHECK FOR DTC (SFI SYSTEM)
|
(a) Check if SFI system DTCs are output.
Powertrain > Engine > Trouble Codes
Result
|
Proceed to
|
DTCs are not output
|
A
|
DTCs are output
|
B
|
A
|
|
|
(a) Read the Data List according to the display on the GTS.
Body Electrical > Combination Meter > Data List
Tester Display
|
Measurement Item
|
Range
|
Normal Condition
|
Diagnostic Note
|
Engine RPM
|
Engine speed input
|
Min.: 0 rpm, Max.: 12701 rpm or Unset
|
Almost the same as actual tachometer
|
The value displayed on the tachometer may deviate.*
|
-
*: For the tolerance of tachometer, refer to Operation Check.
Click here
Body Electrical > Combination Meter > Data List
Tester Display
|
Engine RPM
|
Result
|
Proceed to
|
The value displayed in the Data List and on the tachometer approximately match
|
A
|
The value displayed in the Data List and on the tachometer do not match
|
B
|
|