Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001WZ8X |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [01/2019 - 09/2022] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model without Electric Parking Brake System): Zero Point Calibration of Steering Angle Sensor Initialization Malfunction (X208A); 2020 - 2022 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 09/2022] |
Zero Point Calibration of Steering Angle Sensor Initialization Malfunction (X208A)
|
DESCRIPTION
Code
|
Tester Display
|
Measurement Item
|
Trouble Area
|
X208A
|
Zero Point Calibration of Steering Angle Sensor Initialization Malfunction
|
History of failure in acquiring steering angle zero point even after the vehicle is driven in a straight line at a vehicle speed of 15 km/h (9 mph) or more for 115 seconds or more with the steering angle sensor zero point calibration cleared
|
Poor adjustment of wheel alignment
|
PROCEDURE
1.
|
CHECK FOR DTCs (HEALTH CHECK)
|
(a) Perform the Health Check using the Techstream.
Result
|
Proceed to
|
DTCs are not output
|
A
|
DTCs are output
|
B
|
B |
|
GO TO DIAGNOSTIC TROUBLE CODE CHART
|
A
|
|
|
2.
|
CHECK STEERING ANGLE SENSOR ZERO POINT CALIBRATION
|
(a) Drive the vehicle straight ahead at 30 km/h (19 mph) or more for at least 5 seconds.
(b) Check that the slip indicator light turns off.
OK
|
|
|
3.
|
CLEAR VEHICLE CONTROL HISTORY
|
(a) Using the Techstream, clear the Vehicle Control History.
Chassis > Brake/EPB > Utility
Tester Display
|
Vehicle Control History (RoB)
|
NEXT |
|
END
|
4.
|
ADJUST WHEEL ALIGNMENT
|
for Front: Click here
for Rear: Click here
NEXT
|
|
|
5.
|
PERFORM ZERO POINT CALIBRATION OF STEERING ANGLE SENSOR
|
(a) Drive the vehicle straight ahead at 30 km/h (19 mph) or more for at least 5 seconds.
NEXT
|
|
|
6.
|
CLEAR VEHICLE CONTROL HISTORY
|
(a) Using the Techstream, clear the Vehicle Control History.
Chassis > Brake/EPB > Utility
Tester Display
|
Vehicle Control History (RoB)
|
NEXT |
|
END
|
|