REAR SUSPENSION: REAR STABILIZER BAR (for Sedan): INSTALLATION; 2021 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2020

Last Modified: 05-13-2024	6.11:8.1.0	Doc ID: RM100000001RTT9
Model Year Start: 2021	Model: GR Corolla	Prod Date Range: [09/2020 - 09/2022]
Title: REAR SUSPENSION: REAR STABILIZER BAR (for Sedan): INSTALLATION; 2021 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [09/2020 - 09/2022]

INSTALLATION

PROCEDURE

1. INSTALL REAR STABILIZER BUSHING (for Separate Stabilizer Bracket Type)

(a) Install the 2 rear stabilizer bushings to the rear stabilizer bar.

NOTICE:

Be sure to install the rear stabilizer bushings so that each cutout faces the front of the vehicle.

2. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for Separate Stabilizer Bracket Type)

(a) Install the 2 rear No. 1 stabilizer bar brackets to the 2 rear stabilizer bushings.

NOTICE:

Be sure to install the rear No. 1 stabilizer bar brackets so that each arrow mark faces the front of the vehicle.

*a	Arrow Mark
	Front of the Vehicle

3. INSTALL REAR STABILIZER BAR

(a) Install the rear stabilizer bar, 2 rear No. 1 stabilizer bar brackets and 2 rear stabilizer bushings to the rear suspension member sub-assembly with the 4 bolts.

Torque:

78 N·m {795 kgf·cm, 58 ft·lbf}

NOTICE:

Ensure that the identification mark faces the right side of the vehicle.
Temporarily tighten the bolts in the order of (A), (B), (D) and then fully tighten the 4 bolts in the order of (C), (D), (A) and (B).

*a	Identification Mark

4. STABILIZE SUSPENSION

Click here

5. INSTALL REAR STABILIZER LINK ASSEMBLY LH

(a) Install the rear stabilizer link assembly LH with the nut (A).

Torque:

75 N·m {765 kgf·cm, 55 ft·lbf}

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.

(b) Install the rear stabilizer link assembly LH with the bolt and nut (B).

Torque:

75 N·m {765 kgf·cm, 55 ft·lbf}

6. INSTALL REAR STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.

7. INSTALL REAR FLOOR SIDE MEMBER COVER LH (w/ Cover)

(a) Install the rear floor side member cover LH with the clip (B).

*A	for Type A
*B	for Type B

(b) Install the 3 bolts and clip (A).

Torque:

7.5 N·m {76 kgf·cm, 66 in·lbf}

8. INSTALL REAR FLOOR SIDE MEMBER COVER RH (w/ Cover)

(a) Install the rear floor side member cover RH with the clip.

(b) Install the 3 bolts.

Torque:

7.5 N·m {76 kgf·cm, 66 in·lbf}

9. INSTALL REAR WHEEL

Click here