Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001P6VR
Model Year Start: 2021 Model: GR Corolla Prod Date Range: [06/2020 - 11/2022]
Title: PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM (for Gasoline Model (w/o Safe Exit Assist Function)): DIAGNOSIS SYSTEM; 2021 - 2023 MY Corolla Corolla Hatchback GR Corolla [06/2020 - 11/2022]

DIAGNOSIS SYSTEM

DESCRIPTION

(a) Blind spot monitor data and Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.

CHECK DLC3

(a) Check the DLC3.

Click here 2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 -        ]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: GENERAL INFORMATION

DIAGNOSIS FUNCTION

(a) The blind spot monitor system displays an error message on the multi-information display to inform the driver that the system is unavailable either temporarily or due to a malfunction.

  • When the system is unavailable temporarily:

    Multi-information display displays "Blind Spot Monitor Unavailable".

  • When the system is unavailable due to a malfunction:

    Multi-information display displays "Blind Spot Monitor Malfunction Visit Your Dealer".

(b) The RCTA function displays an error message on the multi-information display to inform the driver that the system is unavailable either temporarily or due to a malfunction.

  • When the system is unavailable temporarily:

    Multi-information display displays "Rear Cross Traffic Alert Unavailable".

  • When the system is unavailable due to a malfunction:

    Multi-information display displays "Rear Cross Traffic Alert Malfunction Visit Your Dealer".

ABNORMALITY HISTORY

HINT:

The abnormality history for a blind spot monitor sensor can be displayed or cleared.

(a) Check abnormality history

(1) Connect the Techstream to the DLC3.

(2) Turn the engine switch on (IG).

(3) Turn the Techstream on.

(4) Turn the blind spot monitor system on.

(5) Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Utility / BSM Master Abnormal History or BSM Slave Abnormal History.

Body Electrical > Blind Spot Monitor Master > Utility

Tester Display

BSM Master Abnormal History

Body Electrical > Blind Spot Monitor Slave > Utility

Tester Display

BSM Slave Abnormal History

(6) Check the results displayed for the abnormality history check.

HINT:

  • If "Yes" is displayed, check the suspected area column for each item.
  • Abnormality history is stored only for the blind spot monitor sensor for which an abnormality has been detected.
  • If "No" is displayed, refer to Problem Symptoms Table.

    Click here 2021 - 2023 MY Corolla Corolla Hatchback GR Corolla [06/2020 - 11/2022]; PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM (for Gasoline Model (w/o Safe Exit Assist Function)): PROBLEM SYMPTOMS TABLE

Abnormality History Table

Tester Display

Item Explanation

Suspected Area

History of Module Blockage

History of blind spot monitor sensor detection problems due to snow, rain, etc. on the bumper
  • Check if a bumper compatible with the blind spot monitor (such as an original equipment bumper) is installed
  • Check if any foreign matter is attached to the bumper
  • Check if any foreign matter is present between the bumper and sensors

History of Low Voltage

History of low supply battery voltage from battery to the blind spot monitor sensor

Power Source Circuit

2019 - 2023 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 11/2022]; PARK ASSIST / MONITORING: BLIND SPOT MONITOR SYSTEM (for Gasoline Model (w/o Safe Exit Assist Function)): Power Source Circuit

History of High Voltage

History of high supply battery voltage from battery to the blind spot monitor sensor

History of Low Temperature

History of low temperature for the blind spot monitor sensor
  • Check the outside temperature
  • Check if any foreign matter is attached to the blind spot monitor sensors and their surrounding areas

History of High Temperature

History of high temperature for the blind spot monitor sensor

(b) Clearing abnormality history

(1) Connect the Techstream to the DLC3.

(2) Turn the engine switch on (IG).

(3) Turn the Techstream on.

(4) Turn the blind spot monitor system on.

(5) Enter the following menus: Body Electrical / Blind Spot Monitor Master or Blind Spot Monitor Slave / Utility / BSM Master Abnormal History or BSM Slave Abnormal History.

Body Electrical > Blind Spot Monitor Master > Utility

Tester Display

BSM Master Abnormal History

Body Electrical > Blind Spot Monitor Slave > Utility

Tester Display

BSM Slave Abnormal History

(6) Clear the abnormality history.