Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001N3WQ |
Model Year Start: 2021 |
Model: GR Corolla |
Prod Date Range: [04/2020 - 09/2022] |
Title: CELLULAR COMMUNICATION: BACK-UP BATTERY: REMOVAL; 2021 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [04/2020 - 09/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during back-up battery removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
Back-up battery
|
Perform the reset back-up battery condition
|
Safety Connect System
|
|
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
Back-up battery
|
Perform the reset back-up battery condition
|
Safety Connect System
|
|
PROCEDURE
1. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET
Click here
2. REMOVE BACK-UP BATTERY
(a) Disengage the 3 claws and 2 guides as shown in the illustration to remove the transceiver cover.
|
Remove in this Direction (1)
|
|
Remove in this Direction (2)
|
(b) Disconnect the connector.
|
Remove in this Direction
|
(c) Remove the back-up battery as shown in the illustration.
|