"Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display.*
|
1. Make sure the HV battery cooling system intake port is not blocked.
|
-
|
2. Make sure there are no gaps between the connecting parts of the ducts.
|
-
|
3. Clean the No. 1 HV battery intake filter.
Check for entry of foreign matter.
|
|
4. Clear the DTCs to reset the learning values even if no DTCs are stored.
|
|
Abnormal sound is heard from the area around the hybrid battery intake duct.
|
1. Make sure the HV battery cooling system intake port is not blocked.
|
-
|
2. Make sure there are no gaps between the connecting parts of the ducts.
|
-
|
3. Clean the No. 1 HV battery intake filter.
Check for entry of foreign matter.
|
|
4. Clear the DTCs to reset the learning values even if no DTCs are stored.
|
|
"Have Traction Battery Inspected" is displayed on the multi-information display.
|
"Have Traction Battery Inspected" is displayed.
|
|
Power switch does not turn on (READY).
|
Smart Key System (for Start Function)
|
|
ECU Power Source Circuit (Hybrid Battery System)
|
|
ECU Power Source Circuit (Hybrid Control System)
|
|
Check Vehicle Control History
(Ready ON Prevention)
|
|
The power switch is slow to turn on (READY).
|
Check Vehicle Control History
(Ready ON Prevention)
|
|
Engine stops and starts less frequently.
|
Check Vehicle Control History
(Limit to Charge / Discharge Control Value by Hybrid Battery)
|
|
Engine speed returns to idle slowly after accelerator pedal is fully released.
|
Check Vehicle Control History
(Limit to Charge / Discharge Control Value by Hybrid Battery)
|
|