Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001N34N
Model Year Start: 2021 Model: Corolla Prod Date Range: [04/2020 - 09/2022]
Title: HYBRID / BATTERY CONTROL: HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY with P610): P0A9B11,...,P0C3315; Hybrid/EV Battery Temperature Sensor "A" Circuit Short to Ground; 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]

DTC

P0A9B11

Hybrid/EV Battery Temperature Sensor "A" Circuit Short to Ground

DTC

P0A9B15

Hybrid/EV Battery Temperature Sensor "A" Circuit Short to Auxiliary Battery or Open

DTC

P0AC511

Hybrid/EV Battery Temperature Sensor "B" Circuit Short to Ground

DTC

P0AC515

Hybrid/EV Battery Temperature Sensor "B" Circuit Short to Auxiliary Battery or Open

DTC

P0ACA11

Hybrid/EV Battery Temperature Sensor "C" Circuit Short to Ground

DTC

P0ACA15

Hybrid/EV Battery Temperature Sensor "C" Circuit Short to Auxiliary Battery or Open

DTC

P0AE811

Hybrid/EV Battery Temperature Sensor "D" Circuit Short to Ground

DTC

P0AE815

Hybrid/EV Battery Temperature Sensor "D" Circuit Short to Auxiliary Battery or Open

DTC

P0BC211

Hybrid/EV Battery Temperature Sensor "E" Circuit Short to Ground

DTC

P0BC215

Hybrid/EV Battery Temperature Sensor "E" Circuit Short to Auxiliary Battery or Open

DTC

P0C3311

Hybrid/EV Battery Temperature Sensor "F" Circuit Short to Ground

DTC

P0C3315

Hybrid/EV Battery Temperature Sensor "F" Circuit Short to Auxiliary Battery or Open

DESCRIPTION

The battery temperature sensors are provided at 6 locations of the HV battery. The resistance of the thermistor, which is built into each battery temperature sensor, varies in accordance with changes in the HV battery temperature. The lower the battery temperature, the higher the thermistor resistance. Conversely, the higher the temperature, the lower the resistance. The battery ECU assembly uses the battery temperature sensors to detect the HV battery temperature. Based on the results of this detection, the battery ECU assembly controls the blower fan. (The blower fan starts when the HV battery temperature rises above a predetermined level.)

Temperature Sensor Identification Cross Reference Table:

DTC Title Sensor

Battery Temperature Sensor

Techstream Display

A

0

1

B

1

2

C

2

3

D

3

4

E

4

5

F

5

6

HINT:

Use the reference table above to determine which battery temperature sensor corresponds to each DTC. For example, sensor A in the DTC title column is battery temperature sensor 0. This sensor is displayed as Hybrid/EV Battery Temperature 1 in the Data List.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

MIL

Warning Indicate

P0A9B11

Hybrid/EV Battery Temperature Sensor "A" Circuit Short to Ground

The battery temperature sensor is malfunctioning, its output voltage is lower than the specified value (short circuit) and the detected temperature is higher than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0A9B15

Hybrid/EV Battery Temperature Sensor "A" Circuit Short to Auxiliary Battery or Open

The battery temperature sensor is malfunctioning, its output voltage is higher than the specified value (short to +B or open) and the detected temperature is lower than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0AC511

Hybrid/EV Battery Temperature Sensor "B" Circuit Short to Ground

The battery temperature sensor is malfunctioning, its output voltage is lower than the specified value (short circuit) and the detected temperature is higher than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0AC515

Hybrid/EV Battery Temperature Sensor "B" Circuit Short to Auxiliary Battery or Open

The battery temperature sensor is malfunctioning, its output voltage is higher than the specified value (short to +B or open) and the detected temperature is lower than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0ACA11

Hybrid/EV Battery Temperature Sensor "C" Circuit Short to Ground

The battery temperature sensor is malfunctioning, its output voltage is lower than the specified value (short circuit) and the detected temperature is higher than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0ACA15

Hybrid/EV Battery Temperature Sensor "C" Circuit Short to Auxiliary Battery or Open

The battery temperature sensor is malfunctioning, its output voltage is higher than the specified value (short to +B or open) and the detected temperature is lower than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0AE811

Hybrid/EV Battery Temperature Sensor "D" Circuit Short to Ground

The battery temperature sensor is malfunctioning, its output voltage is lower than the specified value (short circuit) and the detected temperature is higher than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0AE815

Hybrid/EV Battery Temperature Sensor "D" Circuit Short to Auxiliary Battery or Open

The battery temperature sensor is malfunctioning, its output voltage is higher than the specified value (short to +B or open) and the detected temperature is lower than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0BC211

Hybrid/EV Battery Temperature Sensor "E" Circuit Short to Ground

The battery temperature sensor is malfunctioning, its output voltage is lower than the specified value (short circuit) and the detected temperature is higher than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0BC215

Hybrid/EV Battery Temperature Sensor "E" Circuit Short to Auxiliary Battery or Open

The battery temperature sensor is malfunctioning, its output voltage is higher than the specified value (short to +B or open) and the detected temperature is lower than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0C3311

Hybrid/EV Battery Temperature Sensor "F" Circuit Short to Ground

The battery temperature sensor is malfunctioning, its output voltage is lower than the specified value (short circuit) and the detected temperature is higher than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

P0C3315

Hybrid/EV Battery Temperature Sensor "F" Circuit Short to Auxiliary Battery or Open

The battery temperature sensor is malfunctioning, its output voltage is higher than the specified value (short to +B or open) and the detected temperature is lower than the specified value.

(1 trip detection logic)

  • No. 1 HV supply stack sub-assembly
  • No. 2 HV supply stack sub-assembly
  • HV battery junction block assembly
  • Battery ECU assembly
  • Wire harness or connector

Comes on

Master Warning:

Comes on

Related Data List

DTC No.

Data List

P0A9B11

Hybrid/EV Battery Temperature 1 to 6

P0A9B15

P0AC511

P0AC515

P0ACA11

P0ACA15

P0AE811

P0AE815

P0BC211

P0BC215

P0C3311

P0C3315

HINT:

  • After checking for the above DTCs, check the hybrid battery system Data List item "Hybrid/EV Battery Temperature" using the Techstream.

    Temperature Displayed

    Malfunction

    Below -45°C (-49°F)

    Open or +B short circuit

    95°C (203°F) or more

    GND short circuit

  • If the vehicle as is left as is for 24 hours, the value of "Hybrid/EV Battery Temperature" will be almost the same as the ambient temperature.

MONITOR DESCRIPTION

If the battery ECU assembly detects a malfunction in a HV battery temperature sensor, the battery ECU will illuminate the MIL and store a DTC.

MONITOR STRATEGY

Related DTCs

P0A9D (INF P0A9B11), P0AC7 (INF P0AC511), P0ACC (INF P0ACA11), P0AEA (INF P0AE811), P0BC4 (INF P0BC211), P0C35 (INF P0C3311): Battery temperature sensor circuit malfunction (GND short)

P0A9E (INF P0A9B15), P0AC8 (INF P0AC515), P0ACD (INF P0ACA15), P0AEB (INF P0AE815), P0BC5 (INF P0BC215), P0C36 (INF P0C3315): Battery temperature sensor circuit malfunction (open)

Required sensors/components

Battery temperature sensor

Frequency of operation

Continuous

Duration

TMC's intellectual property

MIL operation

Immediately

Sequence of operation

None

TYPICAL ENABLING CONDITIONS

The monitor will run whenever the following DTCs are not stored

TMC's intellectual property

Other conditions belong to TMC's intellectual property

-

TYPICAL MALFUNCTION THRESHOLDS

TMC's intellectual property

-

COMPONENT OPERATING RANGE

Battery ECU assembly

DTC P0A9D (INF P0A9B11) is not detected

DTC P0AC7 (INF P0AC511) is not detected

DTC P0ACC (INF P0ACA11) is not detected

DTC P0AEA (INF P0AE811) is not detected

DTC P0BC4 (INF P0BC211) is not detected

DTC P0C35 (INF P0C3311) is not detected

DTC P0A9E (INF P0A9B15) is not detected

DTC P0AC8 (INF P0AC515) is not detected

DTC P0ACD (INF P0ACA15) is not detected

DTC P0AEB (INF P0AE815) is not detected

DTC P0BC5 (INF P0BC215) is not detected

DTC P0C36 (INF P0C3315) is not detected

CONFIRMATION DRIVING PATTERN

HINT:

  • After repair has been completed, clear the DTC and then check that the vehicle has returned to normal by performing the following All Readiness check procedure.

    Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY with P610): UTILITY

  • When clearing the permanent DTCs, refer to the "CLEAR PERMANENT DTC" procedure.

    Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY with P610): DTC CHECK / CLEAR

  1. Connect the Techstream to the DLC3.
  2. Turn the power switch on (IG) and turn the Techstream on.
  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
  4. Turn the power switch off and wait for 2 minutes or more.
  5. Turn the power switch on (IG) and turn the Techstream on.
  6. With power switch on (IG) and wait for 10 seconds or more.[*1]

    HINT:

    [*1]: Normal judgment procedure.

    The normal judgment procedure is used to complete DTC judgment and also used when clearing permanent DTCs.

  7. Enter the following menus: Powertrain / HV Battery / Utility / All Readiness.
  8. Check the DTC judgment result.

    HINT:

    • If the judgment result shows NORMAL, the system is normal.
    • If the judgment result shows ABNORMAL, the system has a malfunction.
    • If the judgment result shows INCOMPLETE or N/A, perform the normal judgment procedure again.

WIRING DIAGRAM

CAUTION / NOTICE / HINT

CAUTION:

  • Before the following operations are conducted, take precautions to prevent electric shock by turning the power switch off, wearing insulated gloves, and removing the service plug grip from HV battery.
    • Inspecting the high-voltage system
    • Disconnecting the low voltage connector of the inverter with converter assembly
    • Disconnecting the low voltage connector of the HV battery
  • To prevent electric shock, make sure to remove the service plug grip to cut off the high voltage circuit before servicing the vehicle.
  • After removing the service plug grip from the HV battery, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.
  • After removing the service plug grip, wait for at least 10 minutes before touching any of the high-voltage connectors or terminals. After waiting for 10 minutes, check the voltage at the terminals in the inspection point in the inverter with converter assembly. The voltage should be 0 V before beginning work.

    Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY with P610): PRECAUTION

    HINT:

    Waiting for at least 10 minutes is required to discharge the high-voltage capacitor inside the inverter with converter assembly.

    *a

    Without waiting for 10 minutes

  • Make sure to insulate the high-voltage connectors and terminals of the HV battery with insulating tape after removing it.

    If the HV battery stored without insulating the connectors and terminals, electric shock or fire may result.

  • When disposing of an HV battery, make sure to return it through an authorized collection agent who is capable of handling it safely. If the HV battery is returned via the manufacturer specified route, it will be returned properly and in a safe manner by an authorized collection agent.

    *a

    Dealer

    *b

    Battery Collection Agent

    • Accidents such as electric shock may result if the HV battery is disposed of improperly or abandoned. Therefore, make sure to return all HV batteries through an authorized collection agent.
  • Before returning the HV battery, make sure to perform a recovery inspection.

    Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: HV BATTERY (for LITHIUM-ION BATTERY): RECOVERY INSPECTION

  • Before returning the HV supply stack sub-assembly, make sure to perform a recovery inspection.

    Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: HV BATTERY STACK (for LITHIUM-ION BATTERY): RECOVERY INSPECTION

  • Make a note of the output DTCs as some of them may be necessary for recovery inspection of the HV battery and HV supply stack sub-assemblies.
  • After removing the HV battery, keep it away from water. Exposure to water may cause the HV battery to produce heat, resulting in a fire.

NOTICE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

Click here 2021 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [04/2020 - 09/2022]; INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION

PROCEDURE

1.

CHECK DTC OUTPUT (HV BATTERY, HYBRID CONTROL)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Enter the following menus: Powertrain / HV Battery and Hybrid Control / Trouble Codes.

(d) Check for DTCs.

Powertrain > HV Battery > Trouble Codes

Powertrain > Hybrid Control > Trouble Codes

Result

Proceed to

"P0A9B11, P0A9B15, P0AC511, P0AC515, P0ACA11, P0ACA15, P0AE811, P0AE815, P0BC211, P0BC215, P0C3311 or P0C3315" only is output, or DTCs except the ones in the table below are also output.

A

DTCs of hybrid battery system in the table below are output.

B

DTCs of hybrid control system in the table below are output.

C

System

Relevant DTC

Hybrid Battery System

P060A47

Hybrid/EV Battery Energy Control Module Monitoring Processor Watchdog / Safety MCU Failure

P060B49

Hybrid/EV Battery Energy Control Module A/D Processing Internal Electronic Failure

P060687

Hybrid/EV Battery Energy Control Module Processor to Monitoring Processor Missing Message

Hybrid Control System

P0A1F94

Hybrid/EV Battery Energy Control Module Unexpected Operation

(e) Turn the power switch off.

B

GO TO DTC CHART (HYBRID BATTERY SYSTEM)

C

GO TO DTC CHART (HYBRID CONTROL SYSTEM)

A

2.

READ VALUE USING TECHSTREAM (HYBRID/EV BATTERY TEMPERATURE)

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Enter the following menus: Powertrain / HV Battery / Data List / Hybrid/EV Battery Temperature 1 to 6.

(d) Read the Data List.

Powertrain > HV Battery > Data List

Tester Display

Measurement Item

Range

Reference Value

Diagnostic Note

Hybrid/EV Battery Temperature 1

HV battery temperature sensor output.

-50 to 205.9°C (-58 to 402.6°F)

Same as ambient temperature (left as is for 24 hours)

  • Battery temperature sensor
  • Battery ECU assembly

Hybrid/EV Battery Temperature 2

HV battery temperature sensor output.

-50 to 205.9°C (-58 to 402.6°F)

Same as ambient temperature (left as is for 24 hours)

  • Battery temperature sensor
  • Battery ECU assembly

Hybrid/EV Battery Temperature 3

HV battery temperature sensor output.

-50 to 205.9°C (-58 to 402.6°F)

Same as ambient temperature (left as is for 24 hours)

  • Battery temperature sensor
  • Battery ECU assembly

Hybrid/EV Battery Temperature 4

HV battery temperature sensor output.

-50 to 205.9°C (-58 to 402.6°F)

Same as ambient temperature (left as is for 24 hours)

  • Battery temperature sensor
  • Battery ECU assembly

Hybrid/EV Battery Temperature 5

HV battery temperature sensor output.

-50 to 205.9°C (-58 to 402.6°F)

Same as ambient temperature (left as is for 24 hours)

  • Battery temperature sensor
  • Battery ECU assembly

Hybrid/EV Battery Temperature 6

HV battery temperature sensor output.

-50 to 205.9°C (-58 to 402.6°F)

Same as ambient temperature (left as is for 24 hours)

  • Battery temperature sensor
  • Battery ECU assembly

Powertrain > HV Battery > Data List

Tester Display

Hybrid/EV Battery Temperature 1

Hybrid/EV Battery Temperature 2

Hybrid/EV Battery Temperature 3

Hybrid/EV Battery Temperature 4

Hybrid/EV Battery Temperature 5

Hybrid/EV Battery Temperature 6

HINT:

A malfunctioning sensor (battery temperature sensor 0 to 5) can be determined by comparing the output temperature of the 6 battery temperature sensors.

(e) Turn the power switch off.

NEXT

3.

CHECK CONNECTOR CONNECTION CONDITION (BATTERY ECU ASSEMBLY CONNECTOR)

CAUTION:

Be sure to wear insulated gloves and protective goggles.

(a) Check that the service plug grip is not installed.

NOTICE:

After removing the service plug grip, do not turn the power switch on (READY), unless instructed by the repair manual because this may cause a malfunction.

(b) Remove the No. 1 HV battery protector.

Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: BATTERY ECU (for LITHIUM-ION BATTERY): REMOVAL+

(c) Check the connector connections and contact pressure of the relevant terminals for the battery ECU assembly.

Click here 2019 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 -        ]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: ELECTRONIC CIRCUIT INSPECTION PROCEDURE

OK:

The connector is connected securely and there are no contact problems.

(d) Install the No. 1 HV battery protector.

NG

CONNECT SECURELY

OK

4.

CHECK DTC

(a) Check the DTCs that were output when the vehicle was brought to the workshop.

Result

Proceed to

"P0A9B11, P0A9B15, P0AC511, P0AC515, P0ACA11 or P0ACA15" is also output.

A

"P0AE811, P0AE815, P0BC211, P0BC215, P0C3311 or P0C3315" is also output.

B

B

GO TO STEP 6

A

5.

CHECK HV BATTERY (BATTERY TEMPERATURE SENSOR 0 to 2)

CAUTION:

Be sure to wear insulated gloves and protective goggles.

(a) Check that the service plug grip is not installed.

NOTICE:

After removing the service plug grip, do not turn the power switch on (READY), unless instructed by the repair manual because this may cause a malfunction.

(b) Remove the No. 1 HV battery protector.

Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: BATTERY ECU (for LITHIUM-ION BATTERY): REMOVAL+

(c) Disconnect the z29 battery ECU assembly connector.

NOTICE:

Before disconnecting the connector, check that it is not loose or disconnected.

(d) Measure the resistance of the circuit for the malfunctioning sensor (battery temperature sensor 0 to 2).

Tester Connection:

Tester Connection

Battery Temperature Sensor

z29-22 (TB0) - z29-10 (GB0)

0

z29-21 (TB1) - z29-9 (GB1)

1

z29-20 (TB2) - z29-8 (GB2)

2

Standard Resistance:

Thermistor Temperature

Condition

Specified Condition

0 to 10°C (32 to 50°F)

Power switch off

17.7 to 27.8 kΩ

10 to 20°C (50 to 68°F)

Power switch off

12.0 to 18.2 kΩ

20 to 30°C (68 to 86°F)

Power switch off

8.22 to 12.2 kΩ

30 to 40°C (86 to 104°F)

Power switch off

5.74 to 8.41 kΩ

40 to 50°C (104 to 122°F)

Power switch off

4.09 to 5.91 kΩ

*a

Rear view of wire harness connector

(to Battery ECU Assembly)

(e) Measure the resistance according to the value (s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

z29-22 (TB0) - Body ground and other terminals (except z29-10 (GB0))

Power switch off

10 kΩ or higher

z29-10 (GB0) - Body ground and other terminals (except z29-22 (TB0))

Power switch off

10 kΩ or higher

z29-21 (TB1) - Body ground and other terminals (except z29-9 (GB1))

Power switch off

10 kΩ or higher

z29-9 (GB1) - Body ground and other terminals (except z29-21 (TB1))

Power switch off

10 kΩ or higher

z29-20 (TB2) - Body ground and other terminals (except z29-8 (GB2))

Power switch off

10 kΩ or higher

z29-8 (GB2) - Body ground and other terminals (except z29-20 (TB2))

Power switch off

10 kΩ or higher

(f) Connect the cable to the negative (-) auxiliary battery terminal.

(g) Turn the power switch on (IG).

(h) Measure the voltage according to the value (s) in the table below.

Standard Voltage:

Tester Connection

Switch Condition

Specified Condition

z29-22 (TB0) - Body ground

Power switch on (IG)

Below 1 V

z29-10 (GB0) - Body ground

Power switch on (IG)

Below 1 V

z29-21 (TB1) - Body ground

Power switch on (IG)

Below 1 V

z29-9 (GB1) - Body ground

Power switch on (IG)

Below 1 V

z29-20 (TB2) - Body ground

Power switch on (IG)

Below 1 V

z29-8 (GB2) - Body ground

Power switch on (IG)

Below 1 V

NOTICE:

  • Turning the power switch on (IG) with the service plug grip removed causes other DTCs to be stored. Clear the DTCs after performing this inspection.
  • If the power switch is turned on (IG) with the connectors disconnected, other DTCs will be stored. Be sure to clear the DTCs after the inspection.

(i) Turn the power switch off.

(j) Disconnect the cable from the negative (-) auxiliary battery terminal.

(k) Reconnect the z29 battery ECU assembly connector.

(l) Install the No. 1 HV battery protector.

OK

GO TO STEP 7

NG

REPLACE NO. 1 HV SUPPLY STACK SUB-ASSEMBLY

6.

CHECK HV BATTERY (BATTERY TEMPERATURE SENSOR 3 to 5)

CAUTION:

Be sure to wear insulated gloves and protective goggles.

(a) Check that the service plug grip is not installed.

NOTICE:

After removing the service plug grip, do not turn the power switch on (READY), unless instructed by the repair manual because this may cause a malfunction.

(b) Remove the No. 1 HV battery protector.

Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: BATTERY ECU (for LITHIUM-ION BATTERY): REMOVAL+

(c) Disconnect the z29 battery ECU assembly connector.

NOTICE:

Before disconnecting the connector, check that it is not loose or disconnected.

(d) Measure the resistance of the circuit for the malfunctioning sensor (battery temperature sensor 3 to 5).

Tester Connection:

Tester Connection

Battery Temperature Sensor

z29-19 (TB3) - z29-7 (GB3)

3

z29-18 (TB4) - z29-6 (GB4)

4

z29-17 (TB5) - z29-5 (GB5)

5

Standard Resistance:

Thermistor Temperature

Condition

Specified Condition

0 to 10°C (32 to 50°F)

Power switch off

17.7 to 27.8 kΩ

10 to 20°C (50 to 68°F)

Power switch off

12.0 to 18.2 kΩ

20 to 30°C (68 to 86°F)

Power switch off

8.22 to 12.2 kΩ

30 to 40°C (86 to 104°F)

Power switch off

5.74 to 8.41 kΩ

40 to 50°C (104 to 122°F)

Power switch off

4.09 to 5.91 kΩ

*a

Rear view of wire harness connector

(to Battery ECU Assembly)

(e) Measure the resistance according to the value (s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

z29-19 (TB3) - Body ground and other terminals (except z29-7 (GB3))

Power switch off

10 kΩ or higher

z29-7 (GB3) - Body ground and other terminals (except z29-19 (TB3))

Power switch off

10 kΩ or higher

z29-18 (TB4) - Body ground and other terminals (except z29-6 (GB4))

Power switch off

10 kΩ or higher

z29-6 (GB4) - Body ground and other terminals (except z29-18 (TB4))

Power switch off

10 kΩ or higher

z29-17 (TB5) - Body ground and other terminals (except z29-5 (GB5))

Power switch off

10 kΩ or higher

z29-5 (GB5) - Body ground and other terminals (except z29-17 (TB5))

Power switch off

10 kΩ or higher

(f) Connect the cable to the negative (-) auxiliary battery terminal.

(g) Turn the power switch on (IG).

(h) Measure the voltage according to the value (s) in the table below.

Standard Voltage:

Tester Connection

Switch Condition

Specified Condition

z29-19 (TB3) - Body ground

Power switch on (IG)

Below 1 V

z29-7 (GB3) - Body ground

Power switch on (IG)

Below 1 V

z29-18 (TB4) - Body ground

Power switch on (IG)

Below 1 V

z29-6 (GB4) - Body ground

Power switch on (IG)

Below 1 V

z29-17 (TB5) - Body ground

Power switch on (IG)

Below 1 V

z29-5 (GB5) - Body ground

Power switch on (IG)

Below 1 V

NOTICE:

  • Turning the power switch on (IG) with the service plug grip removed causes other DTCs to be stored. Clear the DTCs after performing this inspection.
  • If the power switch is turned on (IG) with the connectors disconnected, other DTCs will be stored. Be sure to clear the DTCs after the inspection.

(i) Turn the power switch off.

(j) Disconnect the cable from the negative (-) auxiliary battery terminal.

(k) Reconnect the z29 battery ECU assembly connector.

(l) Install the No. 1 HV battery protector.

NG

GO TO STEP 11

OK

7.

CHECK BATTERY ECU ASSEMBLY (VIB VOLTAGE)

CAUTION:

Be sure to wear insulated gloves and protective goggles.

(a) Check that the service plug grip is not installed.

NOTICE:

After removing the service plug grip, do not turn the power switch on (READY), unless instructed by the repair manual because this may cause a malfunction.

(b) Remove the No. 1 HV battery protector.

Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: BATTERY ECU (for LITHIUM-ION BATTERY): REMOVAL+

(c) Connect the cable to the negative (-) auxiliary battery terminal.

(d) Turn the power switch on (IG).

(e) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection

Condition

Specified Condition

z29-24 (VIB) - z29-12 (GIB)

Power switch on (IG)

4.6 to 5.4 V

NOTICE:

Turning the power switch on (IG) with the service plug grip removed causes other DTCs to be stored. Clear the DTCs after performing this inspection.

*a

Component with harness connected

(Battery ECU Assembly)

(f) Turn the power switch off.

(g) Disconnect the cable from the negative (-) auxiliary battery terminal.

(h) Install the No. 1 HV battery protector.

OK

REPLACE BATTERY ECU ASSEMBLY

NG

8.

CHECK HV BATTERY JUNCTION BLOCK ASSEMBLY (BATTERY CURRENT SENSOR OUTPUT VOLTAGE)

CAUTION:

Be sure to wear insulated gloves and protective goggles.

(a) Check that the service plug grip is not installed.

NOTICE:

After removing the service plug grip, do not turn the power switch on (READY), unless instructed by the repair manual because this may cause a malfunction.

(b) Remove the No. 1 HV battery cover panel RH.

Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: HV BATTERY (for LITHIUM-ION BATTERY): REMOVAL+

(c) Disconnect the z23 battery current sensor connector from the HV battery junction block assembly.

NOTICE:

Before disconnecting the connector, check that it is not loose or disconnected.

(d) Connect the cable to the negative (-) auxiliary battery terminal.

(e) Turn the power switch on (IG).

(f) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection

Condition

Specified Condition

z23-1 (VIB) - z23-3 (GIB)

Power switch on (IG)

4.6 to 5.4 V

NOTICE:

  • Turning the power switch on (IG) with the service plug grip removed causes other DTCs to be stored. Clear the DTCs after performing this inspection.
  • If the power switch is turned on (IG) with the connectors disconnected, other DTCs will be stored. Be sure to clear the DTCs after the inspection.

*a

Front view of wire harness connector

(to HV Battery Junction Block Assembly (Battery Current Sensor))

(g) Turn the power switch off.

(h) Disconnect the cable from the negative (-) auxiliary battery terminal.

(i) Reconnect the z23 battery current sensor connector to the HV battery junction block assembly.

(j) Install the No. 1 HV battery cover panel RH.

OK

REPLACE HV BATTERY JUNCTION BLOCK ASSEMBLY

NG

9.

CHECK HARNESS AND CONNECTOR (NO. 2 HV SUPPLY STACK SUB-ASSEMBLY - HV BATTERY JUNCTION BLOCK ASSEMBLY)

CAUTION:

Be sure to wear insulated gloves and protective goggles.

(a) Check that the service plug grip is not installed.

NOTICE:

After removing the service plug grip, do not turn the power switch on (READY), unless instructed by the repair manual because this may cause a malfunction.

(b) Remove the No. 1 HV battery hose.

Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: BATTERY ECU (for LITHIUM-ION BATTERY): REMOVAL+

(c) Disconnect the A No. 2 HV supply stack sub-assembly connector.

NOTICE:

Before disconnecting the connector, check that it is not loose or disconnected.

(d) Disconnect the z23 battery current sensor connector from the HV battery junction block assembly.

NOTICE:

Before disconnecting the connector, check that it is not loose or disconnected.

(e) Measure the resistance according to the value(s) in the tables below.

Standard Resistance (Check for Open):

Tester Connection

Condition

Specified Condition

A-2 (IB1) - z23-2 (IB1)

Power switch off

Below 1 Ω

A-6 (GIB) - z23-3 (GIB)

Power switch off

Below 1 Ω

A-7 (IB0) - z23-4 (IB0)

Power switch off

Below 1 Ω

A-1 (VIB) - z23-1 (VIB)

Power switch off

Below 1 Ω

Standard Resistance (Check for Short):

Tester Connection

Condition

Specified Condition

A-2 (IB1) or z23-2 (IB1) - Body ground and other terminals

Power switch off

10 kΩ or higher

A-6 (GIB) or z23-3 (GIB) - Body ground and other terminals

Power switch off

10 kΩ or higher

A-7 (IB0) or z23-4 (IB0) - Body ground and other terminals

Power switch off

10 kΩ or higher

A-1 (VIB) or z23-1 (VIB) - Body ground and other terminals

Power switch off

10 kΩ or higher

*a

Front view of wire harness connector

(to No. 1 HV Supply Stack Sub-assembly)

*b

Front view of wire harness connector

(to HV Battery Junction Block Assembly (Battery Current Sensor))

(f) Reconnect the z23 battery current sensor connector to the HV battery junction block assembly.

(g) Reconnect the A No. 2 HV supply stack sub-assembly connector.

(h) Install the No. 1 HV battery hose.

NG

REPLACE NO. 2 HV SUPPLY STACK SUB-ASSEMBLY

OK

10.

CHECK HARNESS AND CONNECTOR (BATTERY ECU ASSEMBLY - NO. 1 HV SUPPLY STACK SUB-ASSEMBLY)

CAUTION:

Be sure to wear insulated gloves and protective goggles.

(a) Check that the service plug grip is not installed.

NOTICE:

After removing the service plug grip, do not turn the power switch on (READY), unless instructed by the repair manual because this may cause a malfunction.

(b) Remove the No. 1 HV battery protector.

Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: BATTERY ECU (for LITHIUM-ION BATTERY): REMOVAL+

(c) Disconnect the A No. 1 HV supply stack sub-assembly connector.

NOTICE:

Before disconnecting the connector, check that it is not loose or disconnected.

(d) Disconnect the z29 battery ECU assembly connector.

NOTICE:

Before disconnecting the connector, check that it is not loose or disconnected.

(e) Measure the resistance according to the value(s) in the tables below.

Standard Resistance (Check for Open):

Tester Connection

Condition

Specified Condition

z29-11 (IB1) - A-2 (IB1)

Power switch off

Below 1 Ω

z29-12 (GIB) - A-6 (GIB)

Power switch off

Below 1 Ω

z29-23 (IB0) - A-7 (IB0)

Power switch off

Below 1 Ω

z29-24 (VIB) - A-1 (VIB)

Power switch off

Below 1 Ω

Standard Resistance (Check for Short):

Tester Connection

Condition

Specified Condition

z29-11 (IB1) or A-2 (IB1) - Body ground and other terminals

Power switch off

10 kΩ or higher

z29-12 (GIB) or A-6 (GIB) - Body ground and other terminals

Power switch off

10 kΩ or higher

z29-23 (IB0) or A-7 (IB0) - Body ground and other terminals

Power switch off

10 kΩ or higher

z29-24 (VIB) or A-1 (VIB) - Body ground and other terminals

Power switch off

10 kΩ or higher

*a

Rear view of wire harness connector

(to Battery ECU Assembly)

*b

Front view of wire harness connector

(to No. 2 HV Supply Stack Sub-assembly)

(f) Reconnect the z29 battery ECU assembly connector.

(g) Reconnect the A No. 1 HV supply stack sub-assembly connector.

(h) Install the No. 1 HV battery protector.

OK

REPLACE BATTERY ECU ASSEMBLY

NG

REPLACE NO. 1 HV SUPPLY STACK SUB-ASSEMBLY

11.

CHECK HARNESS AND CONNECTOR (BATTERY ECU ASSEMBLY - NO. 1 HV SUPPLY STACK SUB-ASSEMBLY)

Click here 2021 - 2022 MY Corolla Corolla HV [04/2020 - 09/2022]; HYBRID / BATTERY CONTROL: HYBRID BATTERY SYSTEM (for LITHIUM-ION BATTERY with P610): P0A9B1C,...,P0C331C; Hybrid/EV Battery Temperature Sensor "A" Voltage Out of Range+

OK

REPLACE NO. 2 HV SUPPLY STACK SUB-ASSEMBLY

NG

REPLACE NO. 1 HV SUPPLY STACK SUB-ASSEMBLY