| Last Modified: 07-31-2024 | 6.11:8.1.0 | Doc ID: RM100000001I4DM |
| Model Year Start: 2020 | Model: Corolla Hatchback | Prod Date Range: [03/2019 - ] |
| Title: M20A-FKS (ENGINE MECHANICAL): FRONT CRANKSHAFT OIL SEAL: INSTALLATION; 2020 - 2025 MY Corolla Corolla Hatchback [03/2019 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL TIMING CHAIN COVER OIL SEAL
(a) Apply MP grease to the lip of a new timing chain cover oil seal.
NOTICE:
- Keep the lip free from foreign matter.
- Do not allow MP grease to contact the dust seal.
|
(b) Using SST and a hammer, tap in the timing chain cover oil seal. SST: 09223-00010 Standard Depth: 0 to 2 mm (0 to 0.0787 in.) (From the edge of the No. 2 timing chain cover assembly) NOTICE: Do not tap in the timing chain cover oil seal at an angle. |
|
2. INSTALL CRANKSHAFT PULLEY ASSEMBLY
Click here
![2019 - 2023 MY Corolla Corolla Hatchback [06/2018 - 03/2023]; M20A-FKS (ENGINE MECHANICAL): ENGINE UNIT: REASSEMBLY+](/t3Portal/stylegraphics/info.gif)
3. INSTALL V-RIBBED BELT
Click here
4. INSTALL REAR SIDE RAIL REINFORCEMENT SUB-ASSEMBLY RH
Click here
5. INSPECT FOR ENGINE OIL LEAK
Click here
6. INSTALL REAR ENGINE UNDER COVER RH
Click here
7. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY
Click here
8. INSTALL FRONT WHEEL RH
Click here
|
|