| Last Modified: 05-13-2024 | 6.11:8.1.0 | Doc ID: RM100000001I2LY |
| Model Year Start: 2020 | Model: Corolla | Prod Date Range: [03/2019 - 09/2022] |
| Title: 2ZR-FAE (LUBRICATION): OIL PUMP: INSTALLATION; 2020 - 2022 MY Corolla [03/2019 - 09/2022] | ||
INSTALLATION
PROCEDURE
1. INSTALL OIL PUMP ASSEMBLY
(a) Install the oil pump assembly to the stiffening crankcase assembly with the 3 bolts.
Torque:
21 N·m {214 kgf·cm, 15 ft·lbf}
2. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY
Click here
![2020 - 2023 MY Corolla [03/2019 - 11/2022]; 2ZR-FAE (ENGINE MECHANICAL): ENGINE UNIT: REASSEMBLY+](/t3Portal/stylegraphics/info.gif)
3. INSTALL NO. 2 CHAIN SUB-ASSEMBLY
Click here
4. INSTALL CRANKSHAFT TIMING SPROCKET
Click here
5. INSTALL NO. 1 CHAIN VIBRATION DAMPER
Click here
6. SET NO. 1 CYLINDER TO TDC / COMPRESSION
Click here
7. INSTALL CHAIN SUB-ASSEMBLY
Click here
8. INSTALL CHAIN TENSIONER SLIPPER
Click here
9. CHECK NO. 1 CYLINDER TO TDC / COMPRESSION
Click here
10. INSTALL TIMING CHAIN COVER SUB-ASSEMBLY
Click here
11. INSTALL TIMING CHAIN COVER OIL SEAL
Click here
12. INSTALL CRANKSHAFT PULLEY
Click here
13. INSTALL NO. 1 CHAIN TENSIONER ASSEMBLY
Click here
14. INSTALL CYLINDER HEAD COVER GASKET
Click here
15. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY
Click here
16. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY
Click here
17. INSTALL NO. 1 VACUUM PUMP BRACKET
Click here
18. INSTALL VACUUM PUMP ASSEMBLY
-
for TMC Made:
Click here
-
for TMMMS Made:
Click here
19. INSTALL IGNITION COIL ASSEMBLY
Click here
20. INSTALL WATER INLET HOSE
Click here
21. INSTALL WATER BY-PASS HOSE
Click here
22. CONNECT NO. 3 WATER BY-PASS HOSE
Click here
23. INSTALL VENTILATION HOSE
Click here
24. INSTALL EXHAUST MANIFOLD
Click here
25. INSTALL DRIVE SHAFT HEAT INSULATOR SUB-ASSEMBLY
Click here
26. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
Click here
27. INSTALL ENGINE OIL LEVEL DIPSTICK GUIDE
Click here
28. INSTALL FUEL INJECTOR ASSEMBLY
Click here
29. INSTALL INJECTOR VIBRATION INSULATOR
Click here
30. INSTALL NO. 1 DELIVERY PIPE SPACER
Click here
31. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY
Click here
32. CONNECT FUEL TUBE SUB-ASSEMBLY
Click here
33. INSTALL INTAKE MANIFOLD
Click here
34. INSTALL PURGE VALVE (PURGE VSV)
Click here
35. INSTALL THROTTLE BODY GASKET
Click here
36. INSTALL THROTTLE BODY ASSEMBLY
Click here
37. INSTALL ENGINE HANGERS
Click here
38. REMOVE ENGINE FROM ENGINE STAND
Click here
|
|