Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001I068
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [03/2019 - 04/2020]
Title: DOOR / HATCH: LUGGAGE DOOR LOCK CONTROL CABLE ASSEMBLY: REMOVAL; 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 04/2020]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during luggage door lock control cable sub-assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedures are not Performed

Link

*1: for Hatchback

Disconnect cable from negative battery terminal

Perform steering sensor zero point calibration

Lane Control System

2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022]; PRE-COLLISION: PRE-COLLISION SYSTEM (for Gasoline Model): INITIALIZATION

Pre-collision System

Lighting System (w/ AFS)(EXT)

Initialize back door lock*1

Power Door Lock Control System

2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022]; DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM (for Hatchback, Gasoline Model): INITIALIZATION

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

for TMC Made Gasoline Model:

Click here 2020 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 04/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for TMC Made Gasoline Model): PRECAUTION

for TMMMS Made:

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 04/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for TMMMS Made): PRECAUTION

NOTICE:

After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) battery terminal. (for Navigation System and Audio and Visual System (for Gasoline Model))

Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedures are not Performed

Link

Disconnect cable from negative auxiliary battery terminal

Perform steering sensor zero point calibration

Lane Control System

2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; PRE-COLLISION: PRE-COLLISION SYSTEM (for HV Model): INITIALIZATION

Pre-collision System

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here 2020 MY Corolla Corolla HV [01/2019 - 04/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for HV Model): PRECAUTION

NOTICE:

After the power switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal. (for Audio and Visual System (for HV Model))

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY LH

for Manual Seat:

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2022]; SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): REMOVAL

for Power Seat:

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2022]; SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REMOVAL

2. REMOVE REAR SEAT ASSEMBLY

Click here 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 -        ]; SEAT: REAR SEAT ASSEMBLY: REMOVAL

3. REMOVE REAR DOOR SCUFF PLATE LH (for Gasoline Model)

Click here 2019 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 06/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Hatchback): REMOVAL+

4. REMOVE REAR DOOR SCUFF PLATE LH (for HV Model)

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 04/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Sedan): REMOVAL+

5. REMOVE REAR UNDER SIDE COVER LH (for HV Model)

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 04/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Sedan): REMOVAL+

6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

Click here 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 -        ]; DOOR / HATCH: REAR DOOR OPENING TRIM WEATHERSTRIP: REMOVAL+

7. REMOVE REAR SEAT SIDE GARNISH LH

Click here 2019 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 06/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Hatchback): REMOVAL+

8. REMOVE FRONT DOOR SCUFF PLATE LH

Click here 2019 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 06/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Hatchback): REMOVAL+

9. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

Click here 2019 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 06/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Hatchback): REMOVAL+

10. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2022]; SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: REMOVAL+

11. REMOVE LAP BELT OUTER ANCHOR COVER

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2022]; SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: REMOVAL+

12. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2022]; SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: REMOVAL+

13. REMOVE CENTER PILLAR LOWER GARNISH LH

Click here 2019 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [06/2018 - 06/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Hatchback): REMOVAL+

14. REMOVE ROOF SIDE INNER GARNISH LH

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 04/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Sedan): REMOVAL+

15. REMOVE ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedure as for the LH side.

16. REMOVE CENTER STOP LIGHT SET

Click here 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 -        ]; LIGHTING (EXT): HIGH MOUNTED STOP LIGHT ASSEMBLY (for Sedan): REMOVAL

17. REMOVE PACKAGE TRAY TRIM BRACKET LH

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 04/2020]; SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY (for Sedan): REMOVAL+

18. REMOVE PACKAGE TRAY TRIM BRACKET RH

HINT:

Use the same procedure as for the LH side.

19. REMOVE REAR SEAT SHOULDER BELT HOLE COVER

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 04/2020]; SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY (for Sedan): REMOVAL+

20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 04/2020]; SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY (for Sedan): REMOVAL+

21. REMOVE LUGGAGE COMPARTMENT DOOR COVER

Click here 2020 - 2025 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 -        ]; DOOR / HATCH: LUGGAGE COMPARTMENT DOOR: DISASSEMBLY+

22. REMOVE SPARE WHEEL COVER

(a) Remove the spare wheel cover.

23. REMOVE REAR FLOOR FINISH PLATE

(a) Remove the 2 clips.

(b) Disengage the 2 clips, 2 claws and 6 guides to remove the rear floor finish plate as shown in the illustration.

Remove in this Direction

24. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

(a) Using a clip remover, remove the clip.

(b) Using a clip remover, remove the clip (A), 5 clips (B) and luggage compartment trim cover assembly LH.

Clip (A)

Clip (B)

25. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

(a) Remove the screw.

(b) Disengage the guide and disconnect the fuel lid lock open lever sub-assembly as shown in the illustration.

(c) w/o Fuel Lid Opener Switch:

(1) Disconnect the fuel lid lock control cable sub-assembly.

*A

w/o Fuel Lid Opener Switch

*1

Fuel Lid Lock Control Cable Sub-assembly

*2

Luggage Door Lock Control Cable Sub-assembly

(d) Disconnect the luggage door lock control cable sub-assembly and remove the fuel lid lock open lever sub-assembly.

26. REMOVE LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY

(a) Turn back the floor carpet so that the luggage door lock control cable sub-assembly can be removed.

(b) w/o Wireless Door Lock System:

(1) Disconnect the luggage door lock control cable sub-assembly.

(c) w/ Wireless Door Lock System:

(1) Disengage the claw as shown in the illustration.

(2) Disconnect the luggage door lock control cable sub-assembly.

(d) Disengage each clamp and disconnect the luggage door lock control cable sub-assembly.

(e) Disengage each clamp and remove the luggage door lock control cable sub-assembly.