Last Modified: 05-13-2024 6.11:8.1.0 Doc ID: RM100000001HZMP
Model Year Start: 2020 Model: GR Corolla Prod Date Range: [03/2019 - 04/2020]
Title: AUDIO / VIDEO: RADIO ANTENNA CORD (for Sedan): REMOVAL; 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 04/2020]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during antenna cord sub-assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function When Necessary Procedures are not Performed

Link

Disconnect cable from negative (-) auxiliary battery terminal

Perform steering sensor zero point calibration

Lane Control System

2020 - 2022 MY Corolla Corolla HV [01/2019 - 09/2022]; PRE-COLLISION: PRE-COLLISION SYSTEM (for HV Model): INITIALIZATION

Pre-collision System

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here 2020 MY Corolla Corolla HV [01/2019 - 04/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for HV Model): PRECAUTION

NOTICE:

After the power switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal. (for Audio and Visual System (for HV Model))

Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function When Necessary Procedures are not Performed

Link

*1: for Hatchback

Disconnect cable from negative (-) battery terminal

Perform steering sensor zero point calibration

Lane Control System

2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022]; PRE-COLLISION: PRE-COLLISION SYSTEM (for Gasoline Model): INITIALIZATION

Pre-collision System

Lighting System (w/ AFS)(EXT)

Initialize back door lock*1

Power Door Lock Control System

2019 - 2022 MY Corolla Corolla Hatchback GR Corolla [06/2018 - 09/2022]; DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM (for Hatchback, Gasoline Model): INITIALIZATION

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

for TMC Made Gasoline Model: Click here 2020 MY Corolla Corolla Hatchback GR Corolla [01/2019 - 04/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for TMC Made Gasoline Model): PRECAUTION

for TMMMS Made: Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 04/2020]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for TMMMS Made): PRECAUTION

NOTICE:

After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) battery terminal. (for Navigation System and Audio and Visual System (for Gasoline Model))

PROCEDURE

1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Click here 2020 - 2021 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 06/2021]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL

2. REMOVE NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY

Click here 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [01/2019 - 09/2022]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: DISASSEMBLY+

3. REMOVE ANTENNA CORD SUB-ASSEMBLY

(a) w/ Navigation Antenna:

(1) Disconnect the connector and disengage the 2 claws.

*A

w/ Navigation Antenna

*B

w/ Manual (SOS) Switch or Navigation ECU

(2) Disengage the clamp.

(b) w/ Manual (SOS) Switch or Navigation ECU:

(1) Disengage the 3 clamps.

(c) Disengage the 5 clamps and remove the antenna cord sub-assembly.

4. REMOVE ROOF HEADLINING ASSEMBLY

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 04/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Sedan): REMOVAL

5. REMOVE NO. 1 ROOF SILENCER PAD (for Normal Roof)

Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 04/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Sedan): DISASSEMBLY+

6. REMOVE NO. 2 ROOF SILENCER PAD (for Normal Roof)

for HV Model: Click here 2020 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 04/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING (for Sedan): DISASSEMBLY+

7. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY

(a) for Normal Roof:

(1) Remove the adhesive tape from the roof headlining assembly.

Adhesive Tape

-

-

(2) Remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.

(b) for Moon Roof:

(1) Remove the adhesive tape from the roof headlining assembly.

Adhesive Tape

-

-

(2) Remove the No. 2 antenna cord sub-assembly from the roof headlining assembly.

8. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY (w/ Manual (SOS) Switch)

(a) Disconnect the connector.

(b) Disengage the 5 clamps to remove the No. 3 antenna cord sub-assembly.