Last Modified: 05-13-2024 |
6.11:8.1.0 |
Doc ID: RM100000001HZMO |
Model Year Start: 2020 |
Model: GR Corolla |
Prod Date Range: [03/2019 - 09/2022] |
Title: AUDIO / VIDEO: ROOF ANTENNA: REMOVAL; 2020 - 2022 MY Corolla Corolla Hatchback Corolla HV GR Corolla [03/2019 - 09/2022] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during roof antenna removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for Sedan, HV Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
Disconnect cable from negative (-) auxiliary battery terminal
|
Perform steering sensor zero point calibration
|
Lane Control System
|
|
Pre-collision System
|
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
Click here
NOTICE:
After the power switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) auxiliary battery terminal. (for Audio and Visual System (for HV Model))
Necessary Procedure After Parts Removed/Installed/Replaced (for Sedan, Gasoline Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
Disconnect cable from negative (-) battery terminal
|
Perform steering sensor zero point calibration
|
Lane Control System
|
|
Pre-collision System
|
Lighting System (w/ AFS)(EXT)
|
Initialize back door lock*1
|
Power Door Lock Control System
|
|
CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.
for TMC Made Gasoline Model: Click here
for TMMMS Made: Click here
NOTICE:
After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) battery terminal. (for Navigation System and Audio and Visual System (for Gasoline Model))
PROCEDURE
1. REMOVE ROOF HEADLINING ASSEMBLY (for Hatchback)
Click here
2. REMOVE ROOF ANTENNA ASSEMBLY WITH COVER (for Hatchback)
(a) Disconnect the connector.
|
|
(c) Remove the washer and holder as shown in the illustration.
|
Remove in this Direction
|
(d) Remove the roof antenna assembly with cover as shown in the illustration.
|
Remove in this Direction
|
3. REMOVE ROOF ANTENNA ASSEMBLY (for Hatchback)
(a) Pull the roof antenna assembly in the direction indicated by the arrow (1) shown in the illustration to disengage the 5 claws and 2 guides.
|
Remove in this Direction (1)
|
|
Remove in this Direction (2)
|
(b) Pull the roof antenna assembly in the direction indicated by the arrow (2) shown in the illustration to disengage the guide and remove the roof antenna assembly.
(c) When reusing the roof antenna assembly:
4. REMOVE ROOF HEADLINING ASSEMBLY (for Sedan)
Click here
5. REMOVE TELEPHONE ANTENNA ASSEMBLY WITH COVER (for Sedan)
(a) Disconnect the connector.
|
|
(c) Remove the washer and holder as shown in the illustration.
|
Remove in this Direction
|
(d) Remove the telephone antenna assembly with cover as shown in the illustration.
|
Remove in this Direction
|
6. REMOVE TELEPHONE ANTENNA ASSEMBLY (for Sedan)
(a) Pull the telephone antenna assembly in the direction indicated by the arrow (1) shown in the illustration to disengage the 3 claws and 2 guides.
|
Remove in this Direction (1)
|
|
Remove in this Direction (2)
|
(b) Pull the telephone antenna assembly in the direction indicated by the arrow (2) shown in the illustration to disengage the guide and remove the telephone antenna assembly.
(c) When reusing the telephone antenna assembly:
|